Want this question answered?
ElectrodeTIG welding uses a tungsten electrode that is not consumed during the welding process. MIG welding uses a metal electrode that doubles as filler material for the weld and is consumed during welding.Shielding GasTIG welding primarily uses argon as a shielding gas, with helium occasionally used. Argon is also the primary shielding gas used in MIG welding, but argon mixtures and carbon dioxide are often used for different applications.Filler MaterialTIG welding requires a separate filler material in rod or wire format because the electrode is not consumed. MIG welding delivers the filler material via the electrode.Work Piece MaterialsTIG welding can be applied to just about any metal, from steel to aluminum and exotic alloys. MIG welding was developed for nonferrous metals, but can be applied to steel.DifficultyTIG welding is considered to be more difficult than MIG welding because tighter tolerances have to be maintained between the electrode, the filler rod and the work piece.
orgon welding is done with orgon torch or filler wire.
Consumable electrode welding contain the processes where the electrode acts as the filler material and the electrode that generates the arc. Because the electrode is also the filler material, the electrode 'burns' or is consumed, hence consumable electrode.
filler materials are used to fill the gap between the two job materials during the welding process
Welding would melt the base metal and filler metal while brazzing only melts the filler metal.
It is sometimes called "stick welding", because of the filler metal. The filler metal is in the form of heavy wire coated with flux.
Arc welding uses an electrical current to create enough heat to melt metal. Any type of welding that uses an electric arc is technically arc welding. However, most people use the term 'arc welding' to mean shielded metal arc welding (SMAW), or 'stick welding'. SMAW, MIG, and flux core wire welding use the filler metal as both electrode and filler; TIG welding uses an electric arc to heat the base metal and a separate filler rod to add metal to the weld.
by welding we add some filler material which will fill the gap between the joint.
Filling pass is a welding process which function to filling filler metal inside welding groove before capping process be execute
SFA means Welding Filler Materials.
why oxyacetylene filler rods cannot be used for gas tungusten ar welding
The 'welding sparks' that come off during welding are metal particles from the filler metal, electrode, or base metal that are lost during welding. The standard term is spatter.