Want this question answered?
To connect to a cisco 1800 series router, you need either a network connection that goes to the router, and then you would configure the router to allow telnet or you would need a console cable, also called a rollover or cisco cable and physical access to the device.
Cisco 2600 XM are a line of computer high speed routers that can be either wired or wireless depending on what the consumer chooses. They are usually used by cable companies that offer cable internet.
straight-through cable
100BaseTX implies Cat5 or better RJ45 cables, and between two routers you need a crossover cable.
crossover cable
There are a number of very good cable routers on the market. Some of the top rated one's include 'Buffalo AirStation', 'Netgear DGND3700', 'Asus RT-N66U' and the Cisco Linksys X3000'.
The use of the MPLS router is to connect to the modem and direct the internet connections from the cable company to the computer. The Cisco MPLS router is an industry leader because even with computer expanded products and data center origination, the networking company still basically deals with computer routers.
If you want to connect two routers with a wire you have use a straight lan cable NOT crossover cable.
It's a cable used to connect from a Cisco router's DB60 serial port to a telecommunication company's equipment which provides you with a data link.
cat 5 Ethernet cable
Straight through cables can be used to connect devices together via switches, hubs, routers, bridges.
There are a few different types of cables that can be used to connect routers, but the most common is the Ethernet cable. This is a cable that has RJ-45 connectors on each end, and it can be used to connect devices that are within 100 meters of each other.