Disabling the SSID Broadcast.
This is assuming that there is no outside access to the Ethernet network such as a Internet connection. If there were then firewalls would be needed to prevent a outside intrusion of the network. In addition to physical access security, a wireless network requires authentication and encryption to prevent unauthorized devices from connecting to the wireless network or capturing and decoding the data that is being transferred via a wireless network connection. If the wireless network has outside WAN access then you would also need firewalls as with the Ethernet network.
It uses a 128-bit pre-shared hexadecimal key to prevent unauthorized wireless access.
11 Mbps
If the printer can connect to the wireless access point via ethernet and that the printer has been enabled to be used on a wireless network then in theory yes.
An network access point is where you can wirelessly or wired (depending on the router) gain access to network capabilities it is connected to (eg. internet, domains, remote desktop). The access point when wireless has a WEP/WPA authentication key to prevent unwanted connectors from gain access to those privileges mentioned. The connection goes from the internet modem, then to router (the access point), then to the device you wish to gain network for (whether wireless or wired)
How do multiple access points identify themselves as part of the same network
Wireless access points are created by installing wireless routers. These routers are providing the opportunity for other devices to get wireless access to a network and or internet.
wireless bridge
You will need to add a wireless access point to the wired network.
An network access point is where you can wirelessly or wired (depending on the router) gain access to network capabilities it is connected to (eg. internet, domains, remote desktop). The access point when wireless has a WEP/WPA authentication key to prevent unwanted connectors from gain access to those privileges mentioned. The connection goes from the internet modem, then to router (the access point), then to the device you wish to gain network for (whether wireless or wired)
Connect a wireless network adaptor to the computer and configure the adaptor to connect to the wireless network that has the files you want to access.
SSID