0
What else can I help you with?
What can be done prevent heat build up during welding?
Some preventive measures include : back step welding : pausing between each weld bead : applying a heat sink close to the weld : using smaller electrodes.
What must be done to prevent porosity in welding?
what must be done to prevent this from happening
High wind velocity can cause poroties in weld what must be done to prevent this from happening?
To prevent porosities in welds caused by high wind velocity, you can consider using windshields or barriers to block the wind during welding. Additionally, adjusting the welding parameters such as voltage, current, and shielding gas flow can help improve weld quality in windy conditions. It's also important to ensure proper cleaning of the welding surface and using correct welding techniques to reduce contamination.
What should be done to prevent a person from falling from height while working on radial drilling machine or while welding at height by sitting on shell and welding the nozzle the height around 4 mtr?
4000ft
What have people done to prevent future floods in Mozambique?
build stilt houses
How do you do orgon welding?
orgon welding is done with orgon torch or filler wire.
What must be done to prevent porosities when there is a high wind velocity?
To prevent porosities in welding when there is high wind velocity, it is important to create a windbreak around the welding area. This can be achieved by using welding screens or windshields to reduce the impact of wind on the molten metal. Additionally, adjusting the welding parameters and techniques to suit the windy conditions can help minimize the formation of porosities.
Where do you prefer arc welding?
Almost all welding today is done with electricity (Arc Welding) even on cast iron. SMAW, GTAW, GMAW etc. --AW means Arc Welding.
What is post weld heat treatment?
post weld heat treatment is done on the weld areas after welding, to remove the residual stress present in the welded part formed during the welding process, it prevents to cause brittle fracture in a metal
What can be done to prevent your backyard from becoming soggy during the wet seasons?
big tent
Purpose of oxy-acetylene welding?
You have oxygen and acetylene to blend into the tip for a flame. It will be regulated by adjusting the regulators on the bottles and the welding handle will have adjusting ability for the temperature you need for the metal you are welding.
The majority of SMAW welding is done using what two polarities?
DC-
