answersLogoWhite

0

what must be done to prevent this from happening

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Engineering

When welding in confined spaces you must?

dfc


Why test for polarity in welding?

Different material welds differently depending on polarity. There are also different types of welding rods, so polarity must be tested.


Is it true or false that It is okay to use welding equipment you have no training with when it is similar to equipment you already use?

False. Using welding equipment without proper training can be dangerous, even if it seems similar to equipment you are familiar with. Different welding processes and equipment can have unique safety protocols and operational procedures that must be understood to prevent accidents and ensure effective results. Always seek appropriate training before using unfamiliar equipment.


How does welding damage eye sight?

An electric welding arc produces ultraviolet light and the UV light will damage the retina. With a good welding helmet, your eyes will be protected, but you must have the proper shade (somewhere between 9 and 14 depending on your amperage) and if using an auto-darkening helmet, it must switch on quickly. (1/25000 of a second)


What is arc welding answer?

Arc welding is a type of welding using electricity to heat and fuse metal together. In order to control the process the heat must be controlled by varying the current. MIG (Metal Inert Gas) welding uses an inert cast to protect the weld from the air at extreme temperatures during the welding process. You can find a more detailed explanation of <a href=" http://www.trade-equip.co.uk/blog/?p=969 ">Arc Welding here</a>

Related Questions

What must be done to prevent porosities when there is a high wind velocity?

To prevent porosities in welding when there is high wind velocity, it is important to create a windbreak around the welding area. This can be achieved by using welding screens or windshields to reduce the impact of wind on the molten metal. Additionally, adjusting the welding parameters and techniques to suit the windy conditions can help minimize the formation of porosities.


High wind velocity can cause poroties in weld what must be done to prevent this from happening?

To prevent porosities in welds caused by high wind velocity, you can consider using windshields or barriers to block the wind during welding. Additionally, adjusting the welding parameters such as voltage, current, and shielding gas flow can help improve weld quality in windy conditions. It's also important to ensure proper cleaning of the welding surface and using correct welding techniques to reduce contamination.


Why must metal that has been used before be cleaned prior to welding?

Metal that has been used before must be cleaned prior to welding to remove contaminants such as rust, dirt, oil, and paint, which can negatively affect the quality of the weld. These impurities can lead to poor fusion, increased porosity, and weakened joints, compromising the overall integrity of the welded structure. Cleaning ensures better penetration of the welding material and promotes stronger, more reliable welds. It also helps in achieving consistent and uniform heat distribution during the welding process.


How do you weld uranium?

Welding uranium requires special expertise and precautions due to its radioactive properties. It is typically done using a process known as electron beam welding, which minimizes the heat-affected zone and the risk of contamination. Strict safety measures must be followed to protect the welder and prevent the spread of radioactive particles.


What are the scope and limitations of welding?

Welding is a versatile fabrication process used to join materials, primarily metals, through the application of heat and pressure. Its scope includes various techniques such as arc, MIG, TIG, and resistance welding, applicable in industries like construction, automotive, and aerospace. However, limitations include the requirement for skilled labor, potential for defects like cracks or porosity, and restrictions on the types of materials that can be effectively welded together. Additionally, welding may produce residual stresses and can be unsuitable for certain applications where the integrity of the base material must remain intact.


When welding in confined spaces you must?

dfc


What can be done to prevent Ozones from hurting people?

To prevent ozone hurting people, CFC's must be banned. They are the ones that deplete ozone.


Why is a transformer rectifier often prefferred for smaw?

SMAW stands for shielded metal arc welding. The rectifier used in the welding machines must be referring to this type welding.


What is root opening in welding?

Root opening in welding refers to the gap or space between two pieces of metal at the joint's root, where the weld begins. It is crucial for ensuring proper penetration of the weld metal, which affects the strength and integrity of the joint. The size of the root opening can vary depending on the welding process, joint design, and material thickness, and it must be carefully controlled to achieve optimal results. Proper root opening helps facilitate good fusion and minimizes the risk of defects such as incomplete penetration or porosity.


What must be done to waste water collected from landfills that will prevent the pollution of groundwater?

treated before it is used


In order to contain groundwater a layer of subsoil must have porosity that is it must have empty spaces or poorest in order to allow groundwater to easy pass through this up so?

Porosity is the measure of empty spaces or pores in a material like subsoil. A higher porosity allows groundwater to flow more easily through the soil, helping with containment or storage. Coarser materials like sand have higher porosity and permeability than finer materials like clay.


How is the root opening size determined in welding?

the root opening is the distance between joint members at the root of the weld before welding. the root opening must be accurate so that excess welding is not necessary.