0
What can you do if the port on the motherboard is faulty and a device requires this type of port?
Wiki User
∙ 10y ago
The expansion card
Blaze Goldner
Add your answer:
Earn +20 pts
What if yourPC will not recognize any new hardware plug in via usb port what can i do to slove this problem?
Check the connections from the usb slot to your motherboard, could be a faulty port or a faulty motherboard connection
When you connect the usb device then computer will hang?
The device may be faulty. Using the same usb port try another device if it still hangs then its either: - driver issues, you can check this by going into device manager and look for a USB controller with an exclamation mark next to it. Try reinstalling the driver (right click on the device > uninstall > then scan for new hardware > when prompted choose search automatically unless you know better or have the motherboard driver cd) - It could be a faulty port (hardware) try the device in another USB port. If its the same machine try a port in a different location (So if you're using ports on the front of the case try the ones on the back). If this is the problem you can either stop using that port, have it repaired or replace the components/motherboard
What is Port in hardware?
The port is located may be located on the back or front of your computer. For instance a USB port is usually on the front. A port is then connected to a certain device. For instance your keyboad is connected to a keyboard port so that your computer keyboard can work. All ports are connected to the motherboard, which allows whaever device port you connected to to run...
What is purpose of port computer?
The port is an external connection device on the computer which is used to connect different peripherals. Concretely it is a socket (and the corresponding plug) that enables an external device (peripheral) to be attached to a computer (usually to a motherboard or adapter card).
What is the result of attaching a usb 2.0 device and a usb 3.0 device to a usb hub attached to a motherboard usb 3.0 port?
The USB 2.0 and 3.0 device will work. USB 3.0 is backwards compatible with USB 2.0.
What SCSI device must be terminated?
The final SCSI device in the chain of devices must be terminated. If you have only one device and it's attached to a SCSI port, you must terminate that device. If you have two or more SCSI devices that are linked together and to a shared SCSI Port ie: SCSI Port, Device #1, Device #2, etc, then the final device in the 'chain' must be terminated to allow for proper recognition. The SCSI Port also requires a terminator as well.
Will my old memory card work with a brand new motherboard or will it have to be reset?
Harddrives will work as long as the motherboard supports the interface. SATA requires SATA. IDE requires an IDE port. Ram may or may not, that depends on the motherboard and if it supports the speed of your ram. USB drives should be fine. I'm not sure of the use of a memory card for computers...
WHAT DO you mean AGP in motherboard?
It is the Accelerated Graphics Port on a motherboard for attaching graphics cards.
What is an IDE port?
a port for the IDE cable to connect the hardrive and cddrive to the motherboard.
What is the simplest way to determine the usb is not causing a problem?
I would remove the usb device and see if the problem goes away, if it doesn't you will need to open the computer. Once inside, you will see a serial wire coming from the suspected usb port to the motherboard, go to the motherboard and disconnect this jack. Hopefully your problem will go away, there may be a short in the port itself causing too much electrical current in the motherboard.
Which port does not come directly off the motherboard?
usb
What requires port-based authentication?
RADIUS requires port-based authentication.
