you dont say anything just walk away and leave them do what ever they are doing or what ever they want to do
Pull the pin
Pull pin Aim Squeeze trigger Sweep base of fire
Sweep the fire out. P A S S. pull, aim, squeeze, sweep.
Get the extinguisher and have a good grip on it, pull the pin out of the handle, pull the hose/pipe/tube out if it has one, aim towards the center of the fire. Also, please make sure you are using the proper extinguisher type.
Answer by Regan MorbenStep one - Check gauge to see if it is charged, you don't want to go near a fire with an empty extinguisher,Step two - Locate and pull pin near trigger. You cannot discharge the extinguisher until the pin is out.Step three - Test extinguisher by discharging a small burst in front of your feet, once again you don't want to go near a fire with a non functioning extinguisher.Step four - Approach fire and and aim at base of the flames, not the flames themselves. Sweep side to side until fire is out or extinguisher is depleted.
PASS Pull pin Aim at bottom of flames Squeeze handles hard Sweep the fire out with the extinguisher
Depends on the exact type of extinguisher. For most, remember PASS. Pull safety pin, Aim at bottom of fire, Squeeze handles together hard, and Sweep the fire out with the stream from the extinguisher.
Your question poses questions of its own. If a fire occurs in a school kitchen the precautions have already been ignored. If a fire does occur and it is under the hood suppression system, pull the fire alarm pull station and the hood suppression pull station on your way out of the building. This alerts the building occupants of the hazard and is a first line approach to dousing the fire. Evacuate and let the fire department do the rest. If you have been properly trained you may choose to use the fire extinguisher. Do so only after pulling the fire alarm pull station to begin evacuation of the school. Use the fire extinguisher by applying the PASS method. Pull the pin, Aim at the base of the fire, Squeeze the handle, and Sweep back and forth until the fire is extinguished. Make certain you are using the correct type of fire extinguisher for the type of fire. You will learn the appropriate types of extinguishers upon taking fire extinguisher training. Good luck!
Aim the fire extinguisher at the base of the flames, and sweep back and forthMore specifically:Trigger the fire alarm if not already done.Have others leave the area.Make sure you can get out safely and not be trapped.Select a fire extinguisher type according to what is burning.Pull the pinAim the nozzle at the fuelSqueeze the handleSweep from the edges toward the centerRepeat, as necessary, with another extinguisher, if you have one.
remember the acronym PASS P-pull A-aim S-Squeeze S-Sweep which means you pull out the pin, aim at the fire, squeeze the handle, and spray in a sweeping motion
Pull the pin and rotate the charge handle forward.
Pull, aim, squeeze and sweep. PASS.Pull the pin.Aim at the base of the fire.Squeeze the handle to release the halon.Sweep from side-to-side to extinguish the fire.