Plymouth breeze and a neon i believe good luck
Inside the transmission pan.Inside the transmission pan.
To remove the window regulator in your 2005 Dodge Stratus, you would need to remove the door panel, and then the water shield behind the door panel. Tape the window into the up position with tape, and then you can access all of the nuts and bolts to remove the window regulator. I have included a link below to an instuctional video that will show you how to do this on a 01-06 Dodge Stratus.
The Stratus Seekers was created on 1962-01-31.
01 - 05 Stratus's fit 20's as long as you go with the 225/35/ZR20 Tires. Personally I went with 245. I got a little rub but they are a bit safer.
The ignition failure sensor in an 01 Stratus RT is located above the condenser. It is near the ignition coil. ?æ
To remove the door panel on your 01-06 Dodge Stratus you would first need to remove the door panel. Then there are two bolts that hold the mirror to the door. You will need an 8MM socket or wrench to remove these from the mirror. I have included an instructional video below that walks you through this entire process. Hope this helps. 1aauto.com
David S. Dodge died on 2009-01-01.
where is the interior fuse located at in a 01 dodge caravan
1996 and newer will fit.
No,
i just had one replaced last week in a 96 model explorer, the starter was 160 and with labor it was about 250.00. or if you do it yourself you can get a good used starter or maybe a new starter off eBay for 50.00 maybe a little more or less, Jesse
Yes