if you are driving and you go to stop, then that means that the front rotors are warped. if the front rotors are bad, you will feel a pulsation in pedal while applying brakes. change rotors on front.
The instructions on how to reset the brake maintenance light in a Chevrolet Malibu can be found in the owner manual. It can be viewed for free at Chevrolet's official website.
I am changing rear disc brake pads on a 2004 Chevrolet Malibu lt can I get step by step instructions to make it easier for me.
It is on a bracket under the dash and above the brake pedal.
The 1999 Chevrolet Malibu brake light switch can be found beneath the dashboard, next to the brake pedal. The brake light switch simply plugs in and out.
it is on top of brake pedal in back.
the brake light switch is on the top of the brake pedal arm. under dash.
Low brake fluid possible
the switch is located at the top back of brake pedal!!
If it is not a low fluid condition then you will need to pressure bleed it.
If your brake is leaking,Its easier to replace with rebuilt ones,then to change the piston and seal,. And you should change both
The light should be controlled by a switch operated by the emergency brake handle. The switch could be out of adjustment or could be bad.
The buzzing noise could be the buzzer for a problems with the brake system. If the brakes are not working at all, check to make sure that there is fluid in the brake master cylinder. Low fluid can make the buzzer sound, and is an indication of more severe problems.