The fact that it's supposed to. Voltage is stated as the difference between the two wires carrying electricity to the load. When they bring power to the house from the utility, you get two wires carrying 110v but they're 180 degrees out of phase. Imagine one carries positive 110v and the other carries negative 110v. If you hook one of these wires plus a neutral (zero volts) to the load, you get 110v--110v over 0v. If you hook both of them to the load, you get positive 110v over negative 110v, or 220v. So...red to white is 110v, black to white is 110v, red to black is 220v.
The energy consumption for the same appliance the power consumption in watts would be the same watts = volts X amps. In general if an appliance requires 10 Amps @ 110V then it would only require 5 amps @ 220V In general in an a North American house the appliances that run on 220V are on 220 because they would pull too much power to be logically wired on 110V. So they do pull more power than most 110V appliances.
It is the gravity pull of the moon and the gravity pull of the sun that causes tides.
Gravitational pull of the moon
sun and the moon
Yes, muscles can only shorten and relax. They can only pull.
A 220v heater has two 110v lines coming into it--either two 110v lines with a neutral, like a range, or two 110v lines with no neutral, like a water heater. Unless there's a fan in the system, they only use two wires. It's cheaper that way. If you have a DEDICATED circuit for each 220v heater--one where there's only one thing on the breaker--and you have at least 10/2 wire (unless the amps call for 8/2 or 6/2 wiring, which happens), you can install a two-pole breaker to feed 220v to the heater. If you're just trying to plug the heater into an outlet and get it to work, you've got a problem in that you can't pull 220v out of a 110v outlet no matter how hard you try. Sorry.
The energy consumption for the same appliance the power consumption in watts would be the same watts = volts X amps. In general if an appliance requires 10 Amps @ 110V then it would only require 5 amps @ 220V In general in an a North American house the appliances that run on 220V are on 220 because they would pull too much power to be logically wired on 110V. So they do pull more power than most 110V appliances.
You'll need to contact an electrician who will pull a new wire for you. If you only have 2 wires on the 240 line, you don't have a neutral or a ground; both of which are essential for a modern electric range.
Push and pull indicate direction only, not size. A push is an application of force which causes something to move away from the source of the force. A pull causes something to move toward the source of the force.
For the same power - Watts - you need to run twice as many amps at 220V than at 440V. For the same load, it'll pull half the amps at 220V than it did on 440V
It is the gravity pull of the moon and the gravity pull of the sun that causes tides.
Gravitational pull of the moon
Gravity
Gravity
The gravitational pull of the earth causes a bulge on the opposite side of the moon. The gravitational pull of the earth is greater than the gravitational pull of the sun.
speed
It is he Gravitational pull from the moon...This also causes high tide and low tide.