try replacing the vacuum hose from the brake master cylinder to the intake manifold its a 1/2 in hose
press to release. says so right on the pedal.
A faulty power brake vacuum booster could do that.
the blinker switch shorted out the brake lights... really really common problem, need to replace the switch
A short in the Brake light circuit? Bad brake light switch?
Any time the brake pedal is hard to press then you need to check and see if the brake booster is functioning properly.
It can not. Generally use press brake to bend sheet metal. Press brake has 3 kinds of series. Manual press brake by foot, mechnical press brake, hydraulic press brake.
If you are unable to press in the button to move the shifter. Replaces the brake switch connected to the brake pedal.
Usually a vacuum leak, check your power brake booster hose first, then any other vacuum line for cracks, breaks, or disconnection.
There might be something wrong with the brake pads. It is a good idea to get these checked out right away.
I don't know why exactly, but I do know is that by pulling just slightly on the high beam/cruise control/turning signal lever and you press on the breaks, the lights kick in.
There can be several causes that the engine will die when you press on the break of your 1994 Chevrolet Caprice. The most prevalent cause is restricted fuel flow. The engine can get enough gas to run when the accelerator is depressed but not enough fuel when you apply the brake.
No, on most newer cars you also have to press the brake pedal to shift out of Park.