Usually a vacuum leak, check your power brake booster hose first, then any other vacuum line for cracks, breaks, or disconnection.
Perhaps a vacuum leak check power brake booster for leak and also inlet check valve on booster
try replacing the vacuum hose from the brake master cylinder to the intake manifold its a 1/2 in hose
Could be, plugged up fuel filter, incorrect fuel pressure, failing fuel pump.
Press on to fire engines until scheduled main engine cut off
The brake pads are probably worn. If not repaired, then the metal backer of the brake pads can cut into and damage the brake rotors. Noise is a sign to check the brakes as soon as possible.
Most likely your brake light switch is either not adjusted properly or malfunctioning. It is located under the dash and the brake pedal will press it when it is applied. They are not hard to adjust or replace.
yes
Brake drums can not be cut. The shoes inside can be replaced.Only disc brakes(rotors) can cut.
Clear Cut Press was created in 2002.
Neither.
hi u could hav a leak on u vacuum pipe from u engine to the brake servo or u brake servo is faulty
the transmission is clogged with congellied oil