P2195 - stall at idle after a cold start P2195 - front HO2S signal stuck lean P2195 - may be displayed in case of " stuck rich "
O2 sensor out of range.
O2 Sensor Stuck Lean (Bank1 Sensor1).
The error code P2195 on a 2004 Ford F150 indicates that there is a fault between electronic throttle system and TP1 and TP2 reference points. This can be caused by pinched wires or a glitch in the TPS system.
Trouble code P2195 means: Lack of HO2S-11 Switching, Sensor Indicates Lean
A HEGO sensor indicating lean at the end of a test is trying to correct for an over-rich condition. The test fails when the fuel control system no longer detects switching for a calibrated amount of time.
That means that your o2 sensor is stuck lean (bank 1 sensor 1)
what causes the knock sensor code on a 2002 Kia Spectra. Thank You sreddish@neo.rr.com
Error code P0505 typically indicates a fault with the idle air control system. This could be due to a faulty idle air control valve, a vacuum leak, or a problem with the throttle body. It is recommended to have the system inspected by a mechanic to diagnose and repair the issue.
might want to check for vacuum leaks. wifes focus has rubber hose from valve cover to throttle body (rubber hose that had a big hole in it). according to a parts guy at the dealer most fords use a setup like this and the hoses are a common problem. good luck might want to check for vacuum leaks. wifes focus has rubber hose from valve cover to throttle body (rubber hose that had a big hole in it). according to a parts guy at the dealer most fords use a setup like this and the hoses are a common problem. good luck
Trouble code P0730 means:Incorrect gear ratio
A mutation that causes the code for the wrong amino acid (apexvs.com)