answersLogoWhite

0


Best Answer

Not certain that I understand exactly what you are asking. If you are having a problem in that a cartridge will not fully seat in the chamber, it could be a couple of things. First, check that you have the correct ammunition for the gun in question. While that sounds very basic, it happens more often than you think. Next problem could be a foreign object in the chamber, or fouling from being shot. Clean the chamber with a chamber brush and powder solvent, check the chamber for things like a section of a cartridge case that tore off, and is stuck in place. Last, check the extractors- see that they are clean and free to move. Some firearms are designed to have the extractor slip over the rim when loading- if not free to move, the get caught behind the cartridge.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What causes a rifle round to close tightly in the chamber?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the chamber pressure of the Mini-14 rifle?

Chamber pressure is determined by the cartridge, not the rifle.


How do you clear a m16?

Pull the spring back to expose the chamber. Lift the rifle up so the chamber is a little above eye level while keeping muzzle awarness! Check inside for any amunition. Bring it back down and push the chamber putton to close it. Then close the ejection port cover.


Are 223 and 5.56 interchangeable?

A rifle with a 5.56x45 chamber can utilise .223 Remington cartridges. A rifle with a dedicated .223 Remington chamber cannot accommodate 5.56x45 cartridges. A rifle with a .223 Wylde chamber can accommodate .223 Wylde, .223 Remington, and 5.56x45, but neither a rifle with a 5.56x45 or a .223 Remington chamber can accommodate the .223 Wylde cartridge.


Can you use a 30 caliber on a g-3 rifle?

The G3 rifle can chamber the 7.62x51 NATO cartridge, and it could chamber the .308 Winchester if it needed to. No other cartridges are compatible with this rifle.


Will a 7.62x39 round chamber in a 7.62x51 rifle?

No


How do you load gamo 22 air rifle?

its a break barrel so through the chamber feed hole just put the bullet in and close it up and your ready to shoot


Can you shoot a 7.62 cartridge in a 308 rifle?

A rifle with a 7.62x51 chamber can chamber commercial .308 Winchester ammunition - putting military 7.62x51 ammunition in a rifle with a dedicated .308 Winchester chamber is not recommended. Questions regarding your rifle may be directed at the customer service hotline of the manufacturer, as some imported rifles actually do have a 7.62x51 chamber, but must be stamped as .308 in order to be importable as sporting rifles.


I have a Remington model 514 that will not extract the fired casing. It will extract a bullet before it is fired. Is there any way to fix this.?

Needs to be examined by a gunsmith Remove the bolt and clean the chamber area thoroughly with a .22 caliber bronze brush and solvent. If .22 short cartridges have been fired in this rifle there could be a carbon ring buildup in the chamber where the mouth of the .22 short cartridge is. When a long rifle cartridge is then fired, the longer cartridge case will expand into this carbon ring tightly. Try cleaning the chamber before visiting a gunsmith.


How can you identify a 44cal rifle?

Barrel marking, chamber cast.


How do you know if theres a bullet in a rifle chamber?

By opening the action


Will a 270 round chamber in a 30-03 rifle?

do not attempt this!!!!!!!!!!!!!!!!!!!!!!!


Illustrate the compression chamber of an air rifle?

Answer.com does not support Illustrations.