governor not moving freely or dirty carb
eBay
The best riding mower for hilly terrain is would be any kind of walk behind mower as you control it's movements, speed, and direction. However, if you have a large yard and want a riding mower newer LG mowers a good bet. An older option would be a Gravely Garden Tractor.
Where are the grease fittings on a 18.0 hp, 42" craftsman mower electric start 6 speed translate transaxle
What type oil
When a riding mower is idling too fast, the idle adjustment screw may need to be adjusted. Slowly turn the screw in a counterclockwise direction a little at a time until it idles at the correct speed.
The Poulan XT 30 In. Deck 12.5 HP Briggs & Stratton 6 Speed Tractor is inexpensive
It sounds like it may be from a broken throttle cable, or maybe it's bound up somewhere. Make sure it's one piece and connected on both ends and free in the middle
yes u can, on a riding mower u should be able to unbolt the very front and very rear and it will gain a lot of speed but you wouldn't want to cut grass like that. good luck.Answeryes u can, on a riding mower u should be able to unbolt the very front and very rear and it will gain a lot of speed but you wouldn't want to cut grass like that. good luck.
It depends on what the exact problem is. The most common problem of this type can be solved by replacing the drive belts. If this doesn't fix the problem, it's best to take the mower to a professional.
Top no-load speed is 3050 rpm.
check the plate attached to the engine which has the speed control cable running to it from the front pedal. My mower had a missing bolt which connected the plate to the side of the engine. The cable running to it would move the whole plate. This did not allow the cable to change the speed control arm inside hydrostatic assembly. I have to be careful now with the increased speed and sharp turns. Good Luck
Well your transmission has to be overhauled. The shifter fork moves up and down on the shift gear and in and out of the gear cogs to allow it to shift gears.