It depends on what the exact problem is. The most common problem of this type can be solved by replacing the drive belts. If this doesn't fix the problem, it's best to take the mower to a professional.
The best riding mower for hilly terrain is would be any kind of walk behind mower as you control it's movements, speed, and direction. However, if you have a large yard and want a riding mower newer LG mowers a good bet. An older option would be a Gravely Garden Tractor.
eBay
governor not moving freely or dirty carb
Where are the grease fittings on a 18.0 hp, 42" craftsman mower electric start 6 speed translate transaxle
What type oil
When a riding mower is idling too fast, the idle adjustment screw may need to be adjusted. Slowly turn the screw in a counterclockwise direction a little at a time until it idles at the correct speed.
If your Craftsman riding mower slips going uphill, it may be due to insufficient traction, worn tires, or an overloaded mower. First, ensure the mower is not carrying too much weight and that the tires are properly inflated and have adequate tread. You can also try lowering the mower's speed or using a different route with a gentler incline. If the issue persists, consider checking the mower's drive system for any mechanical problems.
The Poulan XT 30 In. Deck 12.5 HP Briggs & Stratton 6 Speed Tractor is inexpensive
yes u can, on a riding mower u should be able to unbolt the very front and very rear and it will gain a lot of speed but you wouldn't want to cut grass like that. good luck.Answeryes u can, on a riding mower u should be able to unbolt the very front and very rear and it will gain a lot of speed but you wouldn't want to cut grass like that. good luck.
check the plate attached to the engine which has the speed control cable running to it from the front pedal. My mower had a missing bolt which connected the plate to the side of the engine. The cable running to it would move the whole plate. This did not allow the cable to change the speed control arm inside hydrostatic assembly. I have to be careful now with the increased speed and sharp turns. Good Luck
Many mowers no longer have that. It is not a necessary item. The speed control mechanisms have a tab that the manufacturer can bend downward to lock the system in full speed. Common nowadays!
Your riding mower may stay on slow due to several factors, including a clogged air filter, a dirty carburetor, or a faulty throttle cable. Additionally, if the mower is set to a lower speed for safety reasons or if it's experiencing engine issues, it may not operate at full power. Regular maintenance, such as cleaning or replacing filters and checking the throttle linkage, can help resolve these issues. If problems persist, consulting a professional may be necessary.