Want this question answered?
It is for the kick down or passing gear.
That wire is for kick down gear or passing gear.
Kickdown cable needs adjusting.
Show you the automatic transmission, passing gear linkage for a 79 Chevy 350 eng. truck
yes with out the cable connected properly and you are going up a hill it will not go into passing gear. or downshift when needed.
Might be a vacuum leak- check vacuum hoses
Overdrive is controlled by the shift solenoid, and vacuum modulator. the kick down you refer to is not overdrive but passing gear and should also be controlled by vacuum.
Kick-down cable could be snapped. Also, if that's not the prob, then follow the cable to the lever and see it if moves.. if it is stuck, it could be rusted, try P.B. Blaster, it worked for me in only 3 applications and two days of sitting.
one day my 1988 jeep cherokee loredos rpms wouldnt come down i looked at the linkage and it was not accelerated so i reved the motor a little more and then the rpms came back down to normal but when i try to use the passing gear i have no response i have changed the kick down cable, the tps, the plunger next to the tps what else could it be?
possible low refrigerant
hi yes, you can you might half to change the end peace on the tv cable (some people call it the passing gear cable) or kick down cable.
well its Between the Gear and the Throttle there you can find the Kick-Down Cable