White is the neutral wire. Black is hot, green is ground.
The voltage (AC RMS) between the "hot" wire and the "neutral" wire is 110 VAC (volts alternating current). But it should be noted that the "110" volts supplied to homes can range from 95 to 130 volts, with the present standard now being 120 VAC. In addition, if the circuits are wired in accordance to most local codes, the "neutral' wire is connected to the "ground" wire in the distribution (fuse or circuit breaker panel or box), so the 110 volts will also appear between the "hot" wire (black color coded wire) ,and the ground wire (bare wire, within an insulating jacket carrying the insulated "hot" and "neutral" wires). Note, however, that the "ground" wire is not designed nor intended to carry the "return" current from the "hot" wire, but only as a safety "ground" for currents due to shorted or improperly wired devices connected to the circuit.
Any where from 110 volts to 130 volts alternating current is available from a 110 VAC outlet.
Should be about 120 VAC.
wire is often rated at 600 vac, 22 amps reqires # 10
The formula you are looking for is W = A x V.
The voltage (AC RMS) between the "hot" wire and the "neutral" wire is 110 VAC (volts alternating current). But it should be noted that the "110" volts supplied to homes can range from 95 to 130 volts, with the present standard now being 120 VAC. In addition, if the circuits are wired in accordance to most local codes, the "neutral' wire is connected to the "ground" wire in the distribution (fuse or circuit breaker panel or box), so the 110 volts will also appear between the "hot" wire (black color coded wire) ,and the ground wire (bare wire, within an insulating jacket carrying the insulated "hot" and "neutral" wires). Note, however, that the "ground" wire is not designed nor intended to carry the "return" current from the "hot" wire, but only as a safety "ground" for currents due to shorted or improperly wired devices connected to the circuit.
Any where from 110 volts to 130 volts alternating current is available from a 110 VAC outlet.
Should be about 120 VAC.
It will burn due excess current .
They are in tandem because they power a 220 VAC circuit, rather then a 110 VAC circuit.
24 VDC or may be 110 VAC
It varies from country to country. In the USA it is 110 volts, in the UK it 230 volts +/- 10%/6%. In practise in the UK it is 240s volt +/- 6%, the slightly odd looking specification allows harmonisation with rest of Europe. In all these cases, the mains voltage is supplied AC (alternating current) and the voltage is given as root mean square (RMS). The peak voltage in the UK is 384 volts.
wire is often rated at 600 vac, 22 amps reqires # 10
It depends on what 277 volt device you are trying to connect.
bare copper wire is copper orange color.tinned copper wire is silvery color.enamel coated copper magnet wire can come in any color, depending on enamel.plastic coated copper hookup wire can come in any color, depending on plastic.copper wire for household wiring is color coded using plastic coating:black - hot 120 VACwhite - neutral 0 V current returngreen - ground 0 V safety return (no current normally)red - hot 120 VAC, opposite phase from black for use in 240 VAC hookupsetc.copper wiring for industrial 3-phase power has additional colors, which I won't visit here.copper wire for electronic use follows an entirely different color code:red - positive DC powerblack - DC returngreen - negative DC power, or signal if no negative powerother colors - signalsdon't confuse color codes!
The formula you are looking for is W = A x V.
Yes, in most cases it is the white wire. (the black or red wire is the hot and the bare wire is the ground.)