0
What company has torque buster tool to speed up drilling oil and gas well?
Wiki User
∙ 10y ago
ULTerra has this
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What is the torque on a torque converter?
Torque output of the engine at that speed.
What is the relationship between torque and speed for an electric motor?
Torque and speed are inversely proportional
What is the torque speed characteristic?
the ratio of the relative speed of stator magnetic field with the speed of rotor, to the speed of rotor is defined as slip. where as in torque slip characteristic is the graph between the speed of the rotor and the torque experienced on the rotor. in the case of induction motor, the torque decreases with the increase in the rotors speed. while in the case of sychronous motor, its different (you check out, because i just forgot about it!! keep smiling!
What is difference between speed and torque?
speed= distance per seconds & torque= revolution per seconds
Why is the work speed lower than drill speed in gun drilling operations?
If you're comparing the 'free-spinning' speed against the 'working' speed... The reason the work speed is lower is that, while drilling, there are friction and rotational forces acting on the bit - which slows it down.
Explain Speed mode torque mode in variable speed drives in detail?
Torque mode in variable speed drives is where the drive adjusts its torque according to the input. The speed/velocity mode is where the input is used to control the motor's RPM.
What is ment by the term torque multiplication?
Torque multiplication is proportional to the difference in speed between the impeller and the turbine. for example : At an engine speed of 2100 RPM, and torque at that speed of 100 Newton meters, the torque input to the transmission will be 2.2 times that value - 220 Newton meters with help of torque multiplication.
Performance curve of a single phase induction motor?
The performance curve can be a graph of torque versus speed. The torque is zero at zero speed and also at the synchronous speed. Normally an induction motor operates at 90-97% of the synchronous speed, where the slip is between 10% and 3%. In this region the torque is proportional to the slip. As the torque is increased the speed falls until the motor stalls and the speed drops to zero. Below the stalling speed the torque rises between zero speed and the stalling speed. Because the torque is 0 at 0, a single-phase induction motor needs a separate starting winding fed by a starting capacitor to produce a little positive torque that starts the motor.
What is a speed drill?
This variable speed drill is for drilling different diameter chose different speeds. Workpiece material in the drill speed is important.
What are the uses of a gear train?
Either to increase speed and reduce torque or to decrease speed and increase torque while conserving mechanical energy.
What is a steam drill?
A steam drill is a type of drilling machine that is powered by steam. It is commonly used for drilling holes in rocks, especially in mining and tunneling operations. The steam drill revolutionized drilling processes by increasing the speed and efficiency of drilling operations.
What mechanism can increase torque speed?
the motor
