Depends on if the printer is wireless and if you are using a wireless cable. Most HP printers use a standard USB to printer cord. However, we would have to know the exact make and model of your computer to help you out
All you need to connect it to your laptop is a USB cable to plug into the printer so it can connect to the laptop. If your printer came with a CD, then install it using that. Most of the time you need a Type A to Type B USB cable to connect printer to a PC or Laptop. Both side connector are different. You can get these cheap (less than $3-4) on internet or in discount electronics stores. - Neeraj Sharma
NO
You can connect your epson stylus nx420 printer to you laptop, by the mini USB cable included with it. If you don't have one, look on eBay, you could pick one up for £10. If the printer supports Wi-Fi then you can also configure your laptop and set them both up. It also depends on what laptop you have. Hope this has helped.
This depends on which printer you have.Some printers have a serial cable and the newer ons have a usb cable. You connect the cable to the computer at the back . Then reboot your computer. You then insert the driver CD into the computer and then install the drivers for that printer.
first of all plug in usb to parallel printer cable into the computer windows automatically installed found new hardware after that connect the cable into your printer
you can connect any HP Printer from any Laptop by downloading printer driver and though the cable, if you face any problem then you should contact at:44-808-280-2972
A cable or wifi. If a cable is used, it may be classed as a serial, parallel, or USB connecting cable - depending on the type of printer.
You'll have to charge it through your computer or laptop, you should have a cable which will connect you to it.
To connect your desktop or laptop computer to your television you will use a vga cable. Information about how to connect the devices can be found at compnetworking.about.com/od/.../a/connect-pc-tv.htm .
connect the data cable to the computer and copy all contacts from the folder which has it
No, you do not need to use a firewire cable. A lot of printers can now be connected wirelessly.
You have to connect the printer to computer which has either wireless card or computer connected to the wireless router with a cable. After that connect the printer to the computer and go in printer settings. The one you need is sharing. Choose "Sharing", and add users allowed to send print jobs.