For two or more connected networks you can use a bridgeto connect them all together.
It depends on the two networks. A bridge can only connect two networks of the same type (eg Ethernet or Token-Ring), that also use the same layer 3 network address (eg IP subnet or IPX network #, or AppleTalk network #).
A "gateway" device can connect two dissimilar types that share a network address, and a router can connect two networks of different network addresses whether or not they have the same network type.
Router is the device that enables connectivity of two different TCP/IP based networks.
Network. connecting two or mor computer is switch or hub
bus
For a small LAN network, a switch is best. To connect two or more LAN networks, a router is required. (2) From Jean Andrews CompTIA A+ sixth edition (page #852): You can use a crossover cable to connect to computers without a switch or hub making it the simplest network of all. For two or more you will need a switch, hub, or router.
The purpose of a router is to connect dissimilar networks.
Two or more computers that are connected for the purpose of sharing data and programs is called a network.
Yes the more devices connected, the more slow the connection will be.
Connecting different networks requires a router
The USB port is a port used to connect outside devices with a compatible USB port to the computer. A few examples of these devices are USB key drives, tablets, and printers.
Network. connecting two or mor computer is switch or hub
bus
yes its called WAN
For a small LAN network, a switch is best. To connect two or more LAN networks, a router is required. (2) From Jean Andrews CompTIA A+ sixth edition (page #852): You can use a crossover cable to connect to computers without a switch or hub making it the simplest network of all. For two or more you will need a switch, hub, or router.
A router is a device that forwards data packets along networks. A router is connected to at least two networks, commonly two LANs or WANs or a LAN and its ISP's network. Routers are located at gateways, the places where two or more networks connect, and are the critical device that keeps data flowing between networks and keeps the networks connected to the Internet.
The purpose of a router is to connect dissimilar networks.
A guideline for 10-Mbps Ethernet networks stating that between two communicating nodes, the network cannot contain more than five network segments connected by four repeating devices, and no more than three of the segments may be populated.
it means it is a network in more than one place around the world....look it up on GOOGLE =)
Two or more computers that are connected for the purpose of sharing data and programs is called a network.