Conditions and Diseases
Back Neck and Spine
Head, Ears, and Nose
Headaches

What could be wrong if a steel bar fell about 1 meter onto the back right side of your head and there has been pressure behind the nose for 4 days which gets worse with bending down?

131415

Top Answer
User Avatar
Wiki User
Answered
2005-12-31 05:28:12
2005-12-31 05:28:12

You could have a concussion or other serious damage. You only have one body. Don't chance something serious on the response of strangers online. Please contact a health professional immediately. ~ T

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


It could way less, it could way more, or it could way the same. Depends on the pressure. If the pressure is the same in both cubic meters, then the hydrogen ways less than the oxygen.

Because Pressure gauge measures the the differenceof pressure so it is called pressure gauge not meter.

I think you could be referring to a barometer, which measures atmospheric pressure and is an indicator of when it will rain or shine.

You measure the sound pressure with a sound pressure level meter (SPL meter).

"in" and "out" are the direction of the pressure.

The volume of a sound is measured by the sound pressure in pascals or newtons per square meter. The sound pressure level is measured by a sound pressure level meter (SPL meter).

The volume of a sound is measured by the sound pressure in pascals or newtons per square meter. The sound pressure level is measured by a sound pressure level meter (SPL meter).

Take a sound pressure level meter (SPL meter). Try to measure the sound pressure p.

It is an SPL meter. SPL means sound pressure level.

With a sound pressure level meter (SPL meter).

Take a sound pressure level meter (SPL meter). Try to measure the sound pressure p.

Do not rent a sound pressure level meter. Buy it at Radio Shack for 50 dollars. Scroll down to related links and look at "Sound pressure level meter".

It measures the sound pressure level with a microphone, an amplifier and a meter.

A microphone and a meter. A sound pressure level meter.

A meter stop is a small metal or plastic peg placed just beyond the limits of normal meter movement on an analog meter movement to prevent the needle from moving too far off scale. Overloading a meter so that it hits the meter stop hard is often called "pegging" the meter and can damage it by bending the needle.

Yes you can use a flow meter to measure your water pressure. They are available at any home improvement retailer.

Sound is measured in decibels by a sound pressure level meter (SPL-meter).

That depends on the pressure and temperature of the air in the cubic meter. Any time you change the pressure or the temperature of a gas, you change the number of molecules in one cubic meter of it.

You cannot "measure" the subjective loudness feeling in decibel with a "dB"-meter. You can measure the objective sound pressure with a "sound pressure meter" that shows the sound pressure in pascals or the sound pressure level SPL in dB or dBA.

measure the atmosphere pressure

You get a pressure of about 1 atmosphere (or bar) for every 10 meters.Note:The pressure has nothing to do with the volume of water behind it.It only depends on the depth or head.1 meter = 9,794.7 pa35 meters = 342.815 kpa35 meters = 114.83 feet = 49.72 psiThese figures are only for water in the tank.

Take a sound pressure level meter (SPL meter). Try to measure the sound pressure p in pascals or in decibels.

They are used to find the flow of a fluid based on the pressure drop across the meter.

you might depending on how big of a service meter you have,if not you can change the pressure demand valve or pressure regulator depending on whats in your home. actually, increasing the size of the meter (and perhaps the water service line from the main to the home) will provide more flow. The pressure won't change unless there's some sort of regulator as mentioned above. If the static pressure (with no water running on the service) is good and decreases markedly when you run water (that'd be dynamic pressure) you might see an improvement by upsizing the meter and service line. If the static pressure is low and there are no pressure regulators in the line you're sort of stuck with what the utility is providing, unless there's a problem on their end. Where we are the state only requires 20 psi at the meter - if your home is upslope or distant from the meter it may cause difficulties.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.