can be the heater blower motor resistor located in either the ductwork or under hood near blower motor on firewall
Possible causes could be, fuse, relay, sensor, blower motor or electrical connector.
The cause of your furnace blower not working properly could be due to a faulty motor, a clogged air filter, a malfunctioning thermostat, or issues with the electrical connections.
Yes, a blown fuse can cause your blower to stop working. Fuses are designed to protect electrical circuits by breaking the circuit when there is an overload or short circuit. If the fuse linked to the blower's power supply is blown, it will interrupt the power flow, preventing the blower from operating. Checking and replacing a blown fuse is often a simple first step in troubleshooting blower issues.
The blower in my 2001 Honda Civic did not stop working.
One thing that could stop a blower motor from working correctly in a 2010 Ford Fusion is a blown fuse. Another thing that might be stopping the blower from working is a broken fan.
Could have just overheated
It could be the motor, switch, relay, corroded or dirty connector, damaged wire or blown fuse.
A blower motor shutting off with a battery charge light lit might mean that there is a problem with the power supply going to the blower motor. A bad battery or alternator could also be the cause for this.
The blower motor may not be working due to a faulty motor, a blown fuse, a malfunctioning relay, or a problem with the wiring.
There is more than one thing that could cause this. It could be as simple as a bad connection or worst case it could be a blower motor starting to go bad. Next time it isn't working, locate the motor and tap on it. If it starts working, that is a good sign the motor is going bad.
Most likely cause is a failed blower resistor.
Could be, Blown fuse, Bad blower motor, Bad blower motor speed resistor, Bad blower switch,