Many parts of under body could rub on them.
There could be several reasons why you are having trouble getting the tire on the rim. It could be due to the tire being too small or too large for the rim, the tire not being properly aligned with the rim, or the tire not being properly inflated. It is important to make sure that the tire and rim are compatible and that you are following the correct procedure for mounting the tire onto the rim.
could be when the tire seats or seals on the rim
The tire will fit the rim but the clearence around the tire(of the vehicle) may rub.
There could be several reasons why you are having trouble getting the bike tire on the rim. One common issue is that the tire may not be fully deflated before attempting to put it on the rim. Another possibility is that the tire may not be aligned properly with the rim, or that the tire size is not compatible with the rim size. It may also be helpful to use tire levers to assist in getting the tire onto the rim.
The basic reason is going to be friction. The brake pads rub against the tire or tire rim to create it.
It depends on the tire. It could be made for a 15, 16, 17, etc size rim.
Take the tire and the rim to a tire shop. It requires special equipment to properly replace the tire and balance the rim.
To get a tire back on a rim, you can use tire irons or a tire changing machine to carefully pry the tire onto the rim. Start by lubricating the tire bead and rim with soapy water to make it easier to slide the tire on. Use the tire irons to gradually work the tire onto the rim, being careful not to damage the tire or rim. Once the tire is on, inflate it to the recommended pressure and check for any leaks.
To remove a tire stuck on a rim, you can use a tire iron to pry the tire off the rim. Start by loosening the lug nuts, then lift the tire and rim off the ground. Use the tire iron to carefully pry the tire off the rim, working your way around the tire until it is completely removed. Be cautious and patient to avoid damaging the tire or rim.
To remove a tire stuck to a rim, you can use a tire iron or pry bar to carefully separate the tire from the rim. Start by loosening the lug nuts, then use the tire iron to pry the tire away from the rim. Be cautious not to damage the rim or tire in the process. If the tire is still stuck, applying lubricant around the edge of the rim can help loosen it.
To properly seat a tubeless tire on a rim, follow these steps: Ensure the tire and rim are clean and free of debris. Apply tire sealant to the tire bead and rim. Place the tire onto the rim, starting at the valve stem. Use a tire lever or compressor to help seat the tire onto the rim. Inflate the tire to the recommended pressure and check for leaks. If necessary, adjust the tire pressure and re-seat the tire until it is properly seated on the rim.
The rim popped out of the tire because of a sudden increase in pressure or impact that caused the tire to lose its seal with the rim, leading to the rim coming out.