0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the symbol for honor and trade in golden compass game?
In the Golden Compass game, the symbol for honor and trade is represented by a set of scales, which is commonly associated with balance, fairness, and judgment in various contexts including trade and honor.
What are the tools of a mason in the masonic order?
There is no single answer to this question - each degree has its own set of working tools with which they are associated. These working tools have both an exoteric and an esoteric meaning to a Mason at each degree. Among the working tools are the Square, Compasses, Plumb, Level and Gavel.
What is a tool used to mesure angles?
Unit of Measure - Angles are measured in degrees or radians. A degree represents 1/360 of a circle. Each degree is subdivided into 60 minutes. And each minute has 60 seconds. The basic tools used to measure angles are a protractor, compass and set square. Protractor - The protractor is a semi-circular instrument with the degrees marked from 0 to 180. There are two sets of markings; the inner scale goes from right to left and the outer scale from left to right. Compass - A compass is a hinged set of arms. One arm has a pointed end and the other holds a pencil. The compass is used to measure and construct angles. Set Square and Sextant - Set squares are of two kinds--the 90-45-45 degree angle and the 30-60-90 degree angle. They are measuring tools used in drafting and engineering. A sextant is an ancient navigating tool.
When was the masonic creed adopted by the masons?
A creed is a statement of faith or beliefs, coming from the Latin word "credo" meaning "I believe" which is the first word in the Latin version of the Apostles' Creed. There is no "masonic creed" because masons do not have a set of beliefs which are common to all of them. (Every Mason has his own set of beliefs of course) The Masonic Order does have principles on which it is founded as all organizations do, but these are not beliefs.
How do you reset compass on 1997 olds bravada- no owner's manual?
THIS IS RIGHT OUT OF THE MANUAL FOR 97 OLDS BRAVADA THAT I OWN....The compass is self-calibrating, so it does not need to be manually set. However, if C (Calibration) is displayed, the compass will need to be calibrated. You may also place the compass in a non-calibrated mode by pressing and holding the MODE and US/MET buttons simultaneously while in the COMP/TEMP mode. After about 10 seconds, the compass will display C and you can release the buttons. Drive the vehicle in a complete 360 degree circle three times at a speed of less than 5 mph, and the compass will function normally. Once the calibration is complete, the compass will return to a compass reading
How do you recalibrate your compass on your 2000 sebring. I did what the manual said to do but it did not work .The cal light is still on and the compass is incorrect Is there another way to reset?
Compass Calibration The Automatic Compass Calibration feature eliminates the need for the operator intervention under normal conditions. If the CAL indicator is lit, the compass needs to be calibrated. A good calibration requires a level surface and an environment free of large metal objects such as large buildings, bridges, underground cables, railroad tracks, etc. Manual Compass Calibration Compass calibration can also be requested. To manually calibrate the compass, use the STEP button to step to the compass/ temperature display and then hold down both the STEP and US/M buttons simultaneously until the CAL symbol is displayed. Release the buttons once the CAL symbol appears. Manual compass calibration has been initiated at this point. Drive the vehicle in circles in an area free from large metal objects until the CAL symbol is extinguished. When the CAL indicator goes off, the compass is calibrated and should display correct headings. Verify proper calibration by checking North (N), South (S), East (E), and West (W). If the compass does not appear accurate, repeat the calibration procedure in another area. Compass Variance Variance is the difference between magnetic North and geographic North. For proper compass function, the correct variance zone must be set. Setting the Compass Variance Refer to the variance map for the correct compass variance zone. To check the variance zone, the ignition must be on and the compass / temperature displayed. Hold down both the US / M and STEP buttons simultaneously until the VAR symbol is lit and then immediately release both buttons. The current variance zone will now be displayed. To change the zone, press the STEP button until the correct zone is displayed. Wait for about 5 seconds. The trip computer will store this variance in memory and the compass will resume normal operation.
What symbol do you use when you automatically want to add a set of numbers together?
what symbol do you use when you automatically want to add a set of numbers together? the plus symbol + ?
What is the symbol used to denote a set of integers?
Any symbol can be used to denote a set of integers. The set of all integers is denoted by Z, and the set of natural numbers by N.
Where would one find the symbol for degrees on Microsoft Word?
The way that I insert a degree symbol in my version of Word (2002) is: Insert >> Symbol Font: (normal text) Subset: Latin-1 The degree symbol is the right-most symbol on the seventh line. The name of the symbol is displayed on the bottom left of the symbol window. Also, the hex character code is 00B0. Good luck.
What are instruments used in geometry?
Scale, protractor,compass,divider,set square
What is the symbol for the empty set?
The symbol is a zero with a diagonal line through it.
How do you set a map in orienteering?
Find the part of the map that looks like a compass and spin the map so the real compass and the map are both pointing north
