None of the above
depends upon the diameter and length of the straw
Volume = Area*Length so Length = Volume/Area = 750/15 = 50 metres
A constant volume gas thermometer is a thermometer that uses the variations of pressure in gas at different temperatures to measure the temperature. A liquid can then be put into tubes, and rather than measuring the distance of a small quantity, the distance between two parts of the curving tube are used to measure the temperature.
The units for volume are the units for length cubed. For example, the base unit is the meter, and the cubic meter is the basic unit of volume.
-- Measure the length of the box. -- Measure the width of the box. -- Measure the height of the box. -- Multiply (length) times (width) times (height). The product is the volume of the box.
Volume= Length x Height x thickness = Mass ---------- Density So, Thickness = Mass ---------------------------------- Density x Length x Height
Density = Mass / Volume the Volume is what you just said ... length x width x thickness
Its volume is 200 cm3 for every centimeter of thickness.(You haven't mentioned what the book's thickness is.)
Depending on the shape of the solid thickness of the material varies. Thickness=Volume/(length x width) for a rectangular prism. Thickness can also be measured with the help of a vernier calipers.
It does not. It equals volume. The weight will vary depending on the substance occupying that volume.
Length X Width X Thickness. A sheet of aluminum foil does have a thickness. A typical sheet has a thickness of about 0.02 millimeters. There are, of course, thicker and thinner sheets.
Think for yourself. If I tell you that a book is 20 cm long, can you tell me its volume? Of course not. You need to know its width and its thickness.
To calculate the volume of a filing cabinet, measure its length, width, and height in inches. Multiply these three measurements together (volume = length x width x height) to get the total volume in cubic inches. You can convert this into cubic feet or another desired unit if needed.
Measure the length and breadth of one face of the rectangle. Measure the thickness of the rectangle hollow piece. Multiply the length, breadth and thickness and this will give you the volume of the rectangular hollow piece in terms of cubic units. That is, if you measured the length, breadth and height in centimeters, the volume will be in cubic centimeters. Example: If the length of the piece is 10 cm, the breadth of the piece is 6 cm, and the thickness of the piece is 5 cm, the volume of the rectangular hollow piece is given by: 10 cm X 6 cm X 5 cm = 300 cubic cm or cm3
Multiply the density of pewter (0.263 lbs/ cubic inch) by the volume. For a circle, the formula for volume (in inches) is pi (or about 3.14) x the square of the radius x the thickness; for a rectangle, the formula for volume (in inches) is width x length x thickness.
The volume is the Area multiplied by thickness (if the thickness is constant). Area = 1/2 ((a+b)*h) a = the base length b = the top length h = the height (constant) t = the thickness (constant) Volume = Area*t Please note that a trapezium and a trapezoid are defined differently in England and the USA. In England the trapezium has the base and top parallel and the area calculation above is for that definition but the area calculation for a trapezoid is different. The volume will still be Area*t.
Length x Width x Heigth. General rule to find the volume of anything you want. Note: Factor in the thickness of the glass. Do the inside.