Depending on the shape of the solid thickness of the material varies. Thickness=Volume/(length x width) for a rectangular prism. Thickness can also be measured with the help of a vernier calipers.
To calculate vertical thickness, you can use the formula: Vertical thickness = True thickness / cos(strike angle) To calculate true thickness, use the formula: True thickness = Vertical thickness * cos(strike angle)
To calculate the outer diameter (OD) of a cylindrical object when you have the inner diameter (ID) and the thickness of the material, you can use the formula: OD = ID + 2 × Thickness. This accounts for the thickness on both sides of the cylinder. Simply add twice the thickness to the inner diameter to get the outer diameter.
Digital calipers
By thick control.
The ideal thickness will have no obstruction in flow, meaning that no friction will be lost.
Diameter x Thickness
The answer depends on what other information you have.
We divide the overburden thickness by ore thickness to get the stripping ratio For example if we have an overburden thickness of 80m and ore thickness of 50 m , then the stripping ratio will be: 80/50= 1.6
put it in water
To calculate plinth area of a house, you would calculate the thickness of walls that external along with the entire carpet.
How thick? Gotta have thickness to calculate cubic yards.
I think you are asking how do you calculate the VOLUME of a disk 250mm with a thickness of 20 mm. If that is so, then find the area of the circle using the Area = pi times radius squared formula and then multiply by the thickness to get cubic millimeters volume.