cosine @-= t / vt
Can you calculate the ID of a pipe when you have the OD to be 10.75" and the wall thickness to be 0.5"Depends on what you know about it. If you have the outer diameter and you know the wall thickness, then ID = OD-2 x wall thickness
Calculate the thickness of a sheet of notebook paper in mircrome
The thickness of a typical aluminum beverage can is around 0.09 mm. To calculate the thickness for 1 gram of metal in a 35 cm piece, you would first convert 1 gram to the equivalent thickness based on the density of the metal (aluminum has a density of about 2.7 g/cm³), then divide the total length by this thickness.
You can use indirect measurement to calculate the thickness of one index card by stacking multiple index cards together and measuring the total thickness, then dividing that measurement by the number of cards in the stack. This will give you an approximation of the thickness of one index card based on the total thickness of the stack.
The thickness of paper is typically measured using a caliper or micrometer. The formula to calculate the thickness of paper is thickness = weight / (length x basis weight), where weight is the weight of the paper in grams, length is the length of the paper tested in centimeters, and basis weight is the weight of the paper in grams per square meter.
True
Vertical angles 😁😁😁😁
To calculate the outer diameter (OD) of a cylindrical object when you have the inner diameter (ID) and the thickness of the material, you can use the formula: OD = ID + 2 × Thickness. This accounts for the thickness on both sides of the cylinder. Simply add twice the thickness to the inner diameter to get the outer diameter.
Digital calipers
By thick control.
There is no root word for vertical. Ver or vert is not true for vertical.
Depending on the shape of the solid thickness of the material varies. Thickness=Volume/(length x width) for a rectangular prism. Thickness can also be measured with the help of a vernier calipers.
The ideal thickness will have no obstruction in flow, meaning that no friction will be lost.
Diameter x Thickness
The answer depends on what other information you have.
how do calculate the volume of a Vertical vessel in m3/hr?
We divide the overburden thickness by ore thickness to get the stripping ratio For example if we have an overburden thickness of 80m and ore thickness of 50 m , then the stripping ratio will be: 80/50= 1.6