There are 2 different types of these devices: circuit breakers (which can be reset after the problem is fixed) and fuses (which must be replaced after the problem is fixed).
There are two devices that will serve this purpose. One is an electrical circuit breaker and the other is an electrical fuse. Both devices are sized to protect the wire in the circuit from a high current rush of a short circuit.
A fuse is a device for breaking the circuit in case of too high tension
Another device that can protect against high current, shorts, and other problems is a GFCI outlet.
A circuit breaker, or a fuse.
A circuit breaker or fuse
The device is called a switch.
the function of the control device is that you can know if the circuit is on or off
Switch (mechanical or electrical), breaker or fuse.a switch
Flow of electricity in a circuit is controlled by using 'resistor'.
fuse?
fridge thank you
The device is called a switch.
A break in an electric circuit is called an open circuit. Electric current will not flow through an open circuit.
for made of electric circuit safety device,
A break in the wires of an electric current will break or cut the circuit and stop the current from flowing.
the function of the control device is that you can know if the circuit is on or off
Most typically, the most common and easiest-obtainable protective device is - a fuse. A fuse is such a device that is designed to break the circuit if certain conditions are met (typically a level of voltage, current, or a combination of the two).
Most typically, the most common and easiest-obtainable protective device is - a fuse. A fuse is such a device that is designed to break the circuit if certain conditions are met (typically a level of voltage, current, or a combination of the two).
A switch basically represents a gap in the electric circuit. Electric current can pass through a circuit only if it is complete. An incomplete circuit can never pass a current through it. When the switch is in the 'off' position, the circuit has a break (gap) in it. When you put the switch in 'on' position, the circuit wire join and the circuit gets completed.
A voltmeter is a device to measure the voltage in a electric circuit, and must have be connected in parallel to it.
A fuse is the simplest protective device for over current in an electric circuit.
A switch is a device that is used to open and close an electrical circuit that is is connected into.