0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What Direction do you loosen lug nuts on rear wheel of 93 Ford Ranger?
to loosen the lug nuts you turn the lug wrench left or counter clockwise
What direction do you turn oil plug to loosen it on 2006 chevorlet equinox?
Counter clockwise to loosen.
How do you change a stuck on road wheel on GMC Envoy?
Put the nuts back on hand tight then loosen one full turn. Let down and remove the jack, start the vehicle and rock the steering left and right. An assistant can be useful to listen for the wheel coming loose, normally a soft clunk. Check the lug nuts. It will be obvious when the wheel is loose because some of the nuts won't turn. For seriously stuck on wheels it might be necessary to loosen the nuts another half or full turn but be careful not to take them too far as, when the wheel becomes loose, damage to the studs can occur. As a last resort the ultimate stuck on wheel can be loosened by rolling the vehicle slowly back and forth, bringing the vehicle to a stop by applying the brake firmly at the end of each roll.
How do you adjust chain on 1985 Yamaha big wheel?
Very simple if your talking about the sprocket chain. Simply loosen both back wheel nuts turn cam on one side and then the other side, make sure both are turned equal amount of notches, do this until chain is tight and re-tighten big wheel nuts.
What direction do you turn the oil pan plug to loosen on a 2004 Chevy trailblazer?
Turn it to the left.
Which way do you turn the lug nuts to get a tire off a Chrysler town and country van?
The lug nuts are turned counter clockwise to loosen.
Which direction do you turn the lug nuts of a Volkswagen to take them off?
left
How do you change the tire on a 2001 Volvo S40 when the wheel will not come off?
It will be rusted on. Jack it up and loosen all the bolts then kick the living poop out of the bottom of it taking care not to kick the car off the jack. Failing that loosen the nuts 1 turn and drive the car in a circle on some private ground - or somewhere you can not hit anyone else. If it's a front wheel turn full lock and accellerate hard breifly. this will be enough to loosen it. If not try loosening the nuts a little bit more but TAKE CARE. It works for wheel locks with lost or damaged keys as well!! Alternatively take it to a tyre place and get them to take the wheel off - it's far easier and safer!!!!!!
Is it true that people have a hard time to loosen a lug on a tire?
They may. When lug nuts are installed with a power wrench, they get really tight. If they have not been removed in some time, there can be rust on the threads. I keep a light film of anti-seize compound on the lugs of my vehicles for that reason. When changing a flat tire, loosen but do not remove the lug nuts before jacking up the wheel. If you jack the wheel free of the ground BEFORE loosening the lug nuts, it will try to turn instead of loosening the lug nuts.
If you are in a rear-wheel skid you must release your brakes and turn your steering wheel?
If you are in a rear-wheel skid, you must release your brakes and turn your steering wheel __________A. into the direction of the skid.B. opposite direction of the skid.C. straight.
Which way do you turn wrench to remove nuts on P trap?
The SJ nut turns to the left to loosen
What direction do you turn a screw to loosen?
It depends on the "handedness" of the thread of the screw. Most screws have right-handed threads that in order to loosen the screw, the screw is turned in a counterclockwise direction. If however, the screw has a left-handed thread, then to loosen it you would turn the screw in a clockwise direction. By common convention, right-handedness is the default handedness for screw threads. Therefore, most threaded parts and fasteners have right-handed threads so to loosen most screws you would turn the screw in a counterclockwise direction.
