B-number ratings are used by the US Coast Guard regulations to identify the necessary capacity of a fire extinguisher, depending upon the type of extinguishing agent used. Only extinguishers meet all USCG requirements can say "USCG approved".
Class B fires involve flammable or combustible liquids such as gasoline, kerosene, grease and oil.
The numerical rating BEFORE the letter B, for UL ratings of class B extinguishers, indicates the approximate number of square feet of fire it can extinguish (i.e., with no significant depth).
The numerical rating (I, II, III, IV, V) AFTER the letter B indicates Coast Guard classification. For example, a UL 5-B:C, rated for 5 sq ft of flammable liquid fire, would be a USCG B-I extinguisher (with 2 pounds of dry chemical).
To obtain a USCG B-II rating you would need the equivalent of 10 pounds of dry chemical, such as having two UL 3-A, 40-B:C extinguishers, or a 15-pound CO2 extinguisher, or 2 1/2 gallons of AFFF "foam" (UL 3-A:20B).
A 20-pound dry-chemical (120-B:C) would meet USCG B-III requirements, 30 pounds for B-IV and 50 pounds for B-V. Similarly, carbon-dioxide or foam-type extinguishers of various capacities fall within USCG ratings (e.g. 4 pounds CO2 for B-I, 15 pounds for B-II, etc).
The b-2 has about twice the capacity of a b-1.
CLass 1 Class 2 class 3 16-26ft 26 ft-40 ft 40ft-65ft 1 B1 2 b1 or 1 b2 3 b1 or 1 b1 and 1 B2 Im taking a boating class currently
There are an infinite number of solutions. Blank1 = 1 and blank2 = 15 B1 = -1 and B2 = -15 B1 = 2 and B2 = 7.5 B1 = 3 and B2 = 5 B1 = 1.1 and B2 = 15/1.1 etc, etc.
You could use either of the following, by putting the formulas in any cells except A1 and B1: =A1+B1 =SUM(A1:B1)
What is the valid class declaration header for the derived class d with base classes b1 and b2?A. class d : public b1, public b2 {/*...*/};B. class d : class b1, class b2 {/*...*/};C. class d : public b1, b2 {/*...*/};D. class d : b1, b2 {/*...*/};The answer is A, C and D.B is not valid because "class" is not a valid access specifier.All the others are valid because private access is the default when the access specifier is omitted. Note that if class D were declared using the struct prefix, inheritance would default to public access rather than private.
t1 s1 b1 t1 s1 b2 t1 s2 b1 t1 s2 b2 t2 s1 b1 t2 s1 b2 t2 s2 b1 t2 s2 b2 t3 s1 b1 t3 s1 b2 t3 s2 b1 t3 s2 b2 TOTAL 12 combinations OR 2(3 x 2) = 12
Perimeter = area + b1 + b2 + c P = a + b1 + b2 + c
The equation A H b1 plus b2 times 2 equals 8. This is a math problem.
b1 and b2
AREA = A = 1/2 (b1 + b2)(h) h= height = 2(A) / (b1 + b2)
You have 4 6V batteries. Let's name them B1, B2, B3, B4. Now, let's name the terminals on them, so B1 has B1- and B1+ Now let's name your final output of 24V O- and O+ Connect it like this: B1- to O- B1+ to B2- B2+ to B3- B3+ to B4- B4+ to O+
B2 DA bomb obviously!