To start, the hard drive cable connects your hard drive to your motherboard. Its really simple.
They connect your hard drive to your motherboard.
The main function of the Ethernet external hard drive is to connect the internet between the modem and the computer. To be able to connect internet, you need an Ethernet cable.
You cannot hook up a hard drive directly to a cable box.
The cable connects between the motherboard of the computer and the hard-drive or optical drive.
An internal hard-drive fits into a bay inside the computer's tower. A power cable from the power unit is plugged into the hard-drive. A data cable plugs the hard-drive into the motherboard.
1. A floppy cable will almost always contain a small "twist" in it, in which a port of the wires are turned in reverse.2. A floppy cable has 34 pins. A PATA hard drive cable has 40 pins.
A Hard drive in a PC is used to store Operating System and software data so the PC will function.
This is normal.
1. The power cable is not connected to the hard drive. 2. The data cable is not connected to the hard drive. 3. The hard drive logic board has been damaged or is malfunctioning.
yes. pata and ide are the same thing.
No the hard drive is attached to the motherboard via a IDE/SATA cable
The function of cable select jumper setting is to let the cable select which drive takes priority ("master") and which one comes after ("slave").
It is using the EIDE connection. The book says that if you have a hard drive and a CD that the hard drive should be the master and the CD will be the slave.