What do horizontal stabilizers do on an airplane?

What is a back of an airplane called?

Depending on context this could either be 'aft' (when inside the airplane), or 'Empennage' when referring to the entire tail section (the horizontal and vertical stabilizers, the rudder, the elevators, as well as rudder and elevator trim).

What does the horizontal stabilizer do on an airplane?

the horizontal stabilizer controls the pitch of the airplane

What parts helps the aeroplanes control?

Thereare three main control surfaces on an airplane, and these control the three axis of the plane. The ailerons are out on the wings and they control roll. The rudder is on the vertical stabilizer (the tail) and that controls the yaw of the airplane. Finally you have the elevators which are on the horizontal stabilizers of the airplane. the elevators control pitch. (nose up or down)

Why stabilizers are provided in back side of an airplane?

This controls the pitch of the air craft.

What is empanage?

The tail assembly of an aircraft, including the horizontal and vertical stabilizers, elevators, and rudder.

Is there an airplane tail without a stabeliser?

Most airplanes have fixed tail surfaces known as either a horizontal stabilizer or vertical stabilizer. The horizontal stabilizer has an attached moveable surface called an elevator while the vertical stabilizer has an attached moveable surface called a rudder. On certain airplane models, such as the Piper Cherokee or Cessna Cardinal, the entire horizontal tail is a one-piece surface that rotates and performs the function of both the horizontal stabilizer and elevator. Combining the words stabilizer and elevator, this type of control is known as a stabilator. Elevators, stabilators, and rudders, generally have another small moveable control piece on the trailing edge known as a trim tab. Most trim tabs can be adjusted by the pilot in flight to cause the control surface, to which it is attached, to stay slightly deflected in a particular direction, relieving the pilot of having to apply control forces during stabilized flight. Some trim tabs, such as rudder trim tabs on many small airplanes, must be adjusted on the ground and cannot be adjusted in flight. Some airplane designs do not require any stabilizers or control surfaces on the tail. The canard design places a horizontal stabilizer and elevator, or a stabilator, near the front of the airplane and vertical stabilizers and rudders on the tips of the main wing. The main wing is located near the rear of the airplane. The canard design is more efficient in flight than a conventional airplane design, since both the wing and horizontal stabilizer produce lift in flight. In a conventional airplane design, with stabilizers on the tail, the horizontal stabilizer produces a downward force during flight to provide stability, reducing the overall efficiency.

What is the movable horizontal piece on the tail of the airplane?

radar

Why does the back of a plane have three points?

The tail of the typical airplane is made up of two horizontal wings which are called the horizontal stabilizers. the have flaps in the back of them that will stabilize the attitude of the plane at varying speeds. without it it would never get of the ground or stay in the air. The wing that points upwards is the vertical stabilizer and can be compared to the keel on a boat it will control the direction that the plain is pointed in.

What are the horizontal stabilizers on a plane and how do they work?

the horizantal stablers are used to control the planes . i think o.0 - Rhazhaa Nickolee

What is the horizontal part of an airplane tail called?

It is called the horizontal stabilizer. The elevators are mounted on the tail end of it.

Why do airplanes have tails?

The small pair of wings at the back are called the horizontal stabilizers. It steadies they add lift to the back of the plane. they also have things at the back of them called the elevators, which coltrol the pitch of the airplane. The thing sticking up is called the vertical stabilizer. It steadies the airplane. At the back of it is the rudder. it controls the yaw of the plane. So, basically, without them, a plane would spin out of control, or actually never have any control. That's why airplane's have tails

How do you make a paper airplane turn?

Throw it at an angle to the horizontal.