American Wire Gauge ( AWG )
10 AWG can be solid. 8 AWG and larger should be stranded. 2008 NEC 310.3 2011 NEC 310.106(C)
depends on the amperage. 14 AWG for 15 amps, 12 AWG for 20 amps, 8 AWG for 50 amps.
No way
No, code does not allow that.
Use a wire table to find the cross-section area of #33 wire, multiply by 7, then find the AWG for that cross-section.
AWG is American wire gauge and SWG means Standard wire gauge .. swg+1=awg according to my calculation...
12 awg is larger.
In cooper electrical wire, gauge 8 means the wire size assigned by the American Wire Gauge (AWG) system. That is why you always will hear about AWG WIRE, it's not the type of wire is the gauge that we are talking about. A gauge 8 wire will be used for connections requiring from 40-45 amps to a maximum of 73 amps. (24 for power transmission). Diameter of an 8 AWG wire is 0.12849 inches. 8 AWG is solid, not stranded.
AWG plc was created in 1973.
28 awg 1p for data, 24 awg 2c for power. i'm searching for differences bteween 1p and 2c code...
22 AWG has a diameter of 0.0253 inch.
10 AWG can be solid. 8 AWG and larger should be stranded. 2008 NEC 310.3 2011 NEC 310.106(C)
depends on the amperage. 14 AWG for 15 amps, 12 AWG for 20 amps, 8 AWG for 50 amps.
The larger the AWG number the smaller the wire. 10 AWG wire can carry more current than 12 AWG wire.The wire sizes of 24 and 26 are the smallest that are used in the electrical.See related links below
"AWG" in the neighborhood of electrical stuff stands for "American Wire Guage". That's just a standard set of numbers to represent the thickness of wire, used for about the past 150 years. A higher AWG number means thinner wire. If it refers to the wire in the house wiring or the extension cord you're using, then a higher AWG number means that it can deliver less power to outlets or devices than larger wire could. The number of circuits isn't the limiting criterion. The total amount of power supplied to them is.
LANs use AWG ratings between 22 and 26
No way