Cables are anchored in a concrete block (often thousands of tons of concrete) the cables then go up to the first tower, then to the second tower and down to another anchor block. The bridge road section hangs from these main cables by dozens of smaller cables. This way the downward pressure of weight is taken by the towers and helped by each anchor block
Actually, a suspension bridge mostly has 2 or more towers. The towers on a bridge are used for support without them a bridge would collapse! :-)
A suspension bridge.
The Suspension bridge is usually the longest type of bridge in the world. That's the bridge that has two tall towers, and cables linking the towers, and from the cables are wires that hold up the bridge. The Golden Gate Bridge in San Francisco, CA is a famous suspension bridge.
The Golden Gate Bridge is a suspension bridge. Suspension bridges are a good way to span a wide gap because they need only two support towers. These towers are usually on land or in the shallowwater near the shore. Strong cables hang between the two towers. The ends of the cables are attached to heavy anchorpoints on land. Small cables, called stringers, hang down and hold the deck in place.
Bridge towers are used in suspension bridges or cable stayed bridges. cables, what hold roadway, are fixed there.
The towers that support the Golden Gate Bridge's suspension cables are smaller at the top than at the base, emphasizing the tower height of 500 feet above the roadway
A suspension bridge.
A suspension bridge.
There are two possible answers to this question. Tower Bridge is adjacent to the Tower of London and may be named after it or it could be named after the two towers at either end of the bridge which support the suspension cables.
A bridge with overhead cables to support it.
a suspension bridge
They help keep the suspension bridge up by giving it balance.