Want this question answered?
A beaker cover is called a rubber stopper or metal stopper(depends on what the stopper is made of).
The reagent bottle is not used for dropping, having only a common stopper.
The stopper of a chemical reagent container should be handled carefully for two reasons. Firstly, it may contain chemical residues which can be dangerous. Additionally, if the stopper is dirtied it may contaminate the reagent in the bottle when the stopper is put back on.
One way to get it out is to brace the bottle or have a buddy hold it. Throw two or three loops of cotton string around the neck of the bottle (a shoe lace works well). Holding the ends of the string tight, with a sawing motion, pull the string back and forth.After about 3 to 4 minutes of this, the friction of the string will have heated the neck of the bottle, causing it to expand and release the (colder) stopper. Before you put the stopper back into the bottle, grease it lightly with stopper grease or petroleum jelly. Don't put a cold stopper into a hot bottle.DO NOT USE ANY OTHER METHOD to heat the neck of the bottle. The heat of an open flame, for instance, cannot be controlled and it may cause the bottle to explode or crack.A (quicker) variation is to wet a cloth with water from the hot tap (about as hot as you can stand when you wring it out - but no hotter), and wrap it round the neck of the bottle or decanter.
rubber stopper burst up because it has strong afinity with hydrogen
A beaker cover is called a rubber stopper or metal stopper(depends on what the stopper is made of).
If you are thinking about a 'wine professional' then a Sommelier
The neck. Or if you mean the stopper, the cork, cap., or screwtop.
Decanter
A CORK stopper is a plug for a bottle made of cork
Grease the top of the bottle!
Cork
With a few exceptions (notably melting ice) objects expand when heated. If you run hot water on a bottle neck, the heat is applied directly to the bottle and only indirectly to the stopper inside the bottle, so the bottle heats first, and thereby expands sooner than the stopper does. An expanded bottle will exert less pressure on the stopper.
to avoid contaminating the chemical when the stopper is replaced
The reagent bottle is not used for dropping, having only a common stopper.
It's called tartar, a crystalline form of tartaric acid (C4H6O6).
all you have to do is take the bottle to mars and ask the aliens to open it for you> yeah don't listen to that idiot> you just use pliars to carefully remove the stopper