answersLogoWhite

0


Best Answer

If there is no water in the radiator and the reserve tank is full on any vehicle, you realize you have a leak and you fix it before you wreck your engine. First: fill your radiator with water. Look for a leak. If you see that a hose is leaking, yell "Hallelujah." You have the least expensive of all repairs facing you. In that case, you take off all four hoses, the two cooling hoses to the engine and the two heater hoses. You take them to the parts shop and get replacement hoses and put those on the vehicle. When one hose breaks, the others will break soon so you replace all of them at once. You purchase a new thermostat. You will replace the thermostat as well. You take out the old thermostat and leave it off. You will start filling the radiator with coolant instead of water this time. When the level of coolant gets to the level of the thermostat hole, then you install the new thermostat. Then you keep filling the radiator until it is full. You start the engine. Eventually the thermostat will open with a gulp. The level of coolant in the radiator will drop. You fill the radiator with coolant and close the cap.

If there is not a leak in a hose, you call a mechanic.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What do you do if there is no water in the radiator but the reserve tank is full on a 1997 chevy Malibu?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you flush the radiator on a 1997 Chevy Malibu?

Remove the coolant from your 1997 Chevy Malibu radiator. Remove the bottom radiator hose. Run water through the top of the radiator allowing it to run out the bottom.


Where is the thermostat on a 1981 Chevy Malibu w 350?

The 1981 Chevy Malibu 350 engine thermostat is located on the front of the engine. You can follow the water supply hose from the radiator to the thermostat.


Do you need to put antifreeze in a1999 Chevy Malibu?

any vehicle that is water cooled and has a radiator needs antifreeze.


97 Chevy Malibu 4 cylinder replace water pump?

The water pump on a 97 Chevy Malibu 4 cylinder is replaced by removing the engine accessories, drive belt, and radiator hoses. The pump can then be unbolted, removed, and a new pump installed.


What are the top reasons a check water level light will come on in a 2000 Chevy Malibu?

You may need to add water to the radiator or windshield washer tank


How do you change the water pump on a 1997 Chevy Malibu V6?

How do you change the water pump on a 1997 chevy malibu?


Where is the thermostat located on a 1998 Chevy Malibu 4.2L?

It is located within the water outlet at the bottom of the top radiator hose. I hope this helps you. Mark


How do you change thermostat on 2004 Chevy Malibu classic?

Drain the radiator. The thermostat is in a housing connected to the water pump. Remove the housing to replace the thermostat and gasket.


How do you remove a water pump on a 2005 Chevy Malibu 2.2 ecotec?

how do I remove a watwr pump on a 2005 chevy malibu


Instrutions on how to change the thermostat on a 1998 2.4l Chevy Malibu the one under the water pump?

follow the top radiator hose to the engine. its under the cover where the hose attatches


How do i add water to the radiator in a 2005 Malibu?

It is no longer necessary to add just water to a radiator in newer cars like the 2005 Malibu. An antifreeze that is half water and half antifreeze is usually best. Add the 50/50 antifreeze to the radiator overflow tank. It should be a plastic, see through tank hooked to the radiator.


How do you flush a radiator on a 1996 Chevy Lumina?

Remove the bottom radiator hose on your 1996 Chevy Lumina radiator. Put a water hose in the top of the radiator. Allow the water hose to run until the water draining from the bottom of the radiator runs clear.