check ur lines and see if they are kinked or broken
Also check the fuel pump fuse and fuel pump relay.
Check fuel pump fuse. If you have changed the fuel filter on a 2000, you might have forgotten to put the rubber grommet between new fuel filter and fuel pump (look at your old fuel filter). Check fuel pump fuse. If you have changed the fuel filter on a 2000, you might have forgotten to put the rubber grommet between new fuel filter and fuel pump (look at your old fuel filter). Check fuel pump fuse. If you have changed the fuel filter on a 2000, you might have forgotten to put the rubber grommet between new fuel filter and fuel pump (look at your old fuel filter).
The fuel pump is in the tank. The filter is just in front of the tank.
Either the fuel filter is clogged or the fuel pump is defective, even if it is a new pump.
well if you have fuel and a new filter a good fuel pump relay and the wires going to the fuel pump have power and no fuel pressure you need a fuel pump
The fuel filter is part of the pump module in the tank. It is normally serviced with a new fuel pump.
even though it sounds like it is pumping it may not be, try a new pump and new fuel filter
Does the fuel pump work? Check that. yes.
The bad news: the fuel filter is a "non-serviceable" part located within the fuel pump. The good news: you get a new fuel filter for free when your fuel pump is replaced.
the 98 and 99 Plymouth neon's do not have a fuel filter, they have a fuel screen that right in line with the fuel pump. I found this out only yesterday when I was had to replace my fuel pump. If your car is not starting and blowing fuses for the fuel pump, you need a new fuel pump.
Blockage in the fuel line, remove the fuel line at the fuel pump, and use compressed air to blow thru the line from the feed to the fuel filter, if it blows thru then you dont have a blockage, make sure your fuel pump is coming on when you turn on the key, if not check to see if you have 12 volts at the pump when you turn the key on, if not check the fuel pump relay, if you do have 12 volts at the pump when you turn the key on, check the connections on the fuel pump or replace the fuel pump with a new one. make sure to disconnect the battery before removing the fuel pump.
no you dont have to reset the computer after changing the fuel pump
It is not required, but it would help the life of your new fuel pump