Want this question answered?
A lid.
The plastic bottle (which is a blight on our planet and should not be bought and tossed away lightly) is made of very thin plastic. As thinly as possible to make it inexpensive to manufacture (so that it can be bought and tossed away thoughtlessly to fill landfills). A small drop in temperature, after the lid is on, will mean that the pressure in the bottle is less than the outside pressure so the bottle implodes. Try drinking the contents of a bottle of water, put the lid on and put it in the freezer. Observe what happens.
it may cause reactions if stock bottles lid get exchange with each other.
One option for removing glue from a pill bottle is to use a product such as Goo Gone. People have also had success using white vinegar, or simply soaking the bottle in warm water for 5 to 10 minutes.
In order to safely get rid of Febreeze, simply unscrew the lid of the bottle and pour the Febreeze down your sink drain. From there, turn on your water faucet and allow the warm water help push the chemicals down the drain.
Yes, the solvent of the polish will evaporate when the lid is off the bottle.
Bottle is to cork - as jar is to LID.
As resonance works, it quietes down the noise of your intake at WOT, or wide open throttle. You can remove it to make your exhaust sound louder by removing your intake tubing, removing the bottle looking plastic box, and filling the hole with a pill or vitamin bottle lid. I believe I used a Tylenol lid. It does not give you any power, only a better sounding intake.
A lid.
Inside the lid
to hold the lid down!
You have to have a 2 liter bottle. then you need some hot water. Swish the hot water around in the bottle with the lid closed. Then after that light a match and put it in the bottle. Close the lid as soon as possible. then squeeze the bottle for a while and watch. Then soon enough the cloud will form, and if you open the lid after you see the cloud and watch, the cloud will come out the top!!!!! HAVE FUN!!!!!
Terrarium. You can use any old glass container with a lid such as an aquarium
you take a bottle opener and use the top part on lid and you squeeze it and it opens.
It loosens because the particles relax
Ballons are made of an elastic plastic while a bottle in a harder plastic
It is not necessary to buy a lid. I used a cap from a bottle of pop. The company told me they were designed to work with this readily available replacement lid.