Some objectives come closer to the slides than others. If you switch to a closer objective it may press down on the slide and break it.
Why is it not good to tiit the microscope while observing a wet slide
A microscope should not be focused by moving the objectives and the slide closer together because it will affect the working distance. It is the optimal distance between objective lens and the upper surface of the slide.
body tube
If the objectives touch a slide, it will damage it, making it harder to observe the object you are viewing in the microscope.
It wouldnt be a slide. It would be a larger chair depending on the moleculer compounds involed in the changing plastyic compound. If it is a metal the mole ratio will cause the slide to become abnormally hard. 8====D
Movements viewed through the microscope are exaggerated quite a bit. As such, it's best to attempt to line up the object on the slide by looking at the slide directly, rather than through the objective.
Sometimes, if the stage is set high enough, the objective lens can hit or scratch the slide when it's changed, because each objective lens is a different length. From the back of the microscope, you cannot see if the lens is going to hit the slide or not, and run the risk of disturbing your sample. This problem can be prevented by looking from the side and stopping if it looks like the lens is going to hit the slide.
Sometimes, if the stage is set high enough, the objective lens can hit or scratch the slide when it's changed, because each objective lens is a different length. From the back of the microscope, you cannot see if the lens is going to hit the slide or not, and run the risk of disturbing your sample. This problem can be prevented by looking from the side and stopping if it looks like the lens is going to hit the slide.
Movements viewed through the microscope are exaggerated quite a bit. As such, it's best to attempt to line up the object on the slide by looking at the slide directly, rather than through the objective.
Sometimes, if the stage is set high enough, the objective lens can hit or scratch the slide when it's changed, because each objective lens is a different length. From the back of the microscope, you cannot see if the lens is going to hit the slide or not, and run the risk of disturbing your sample. This problem can be prevented by looking from the side and stopping if it looks like the lens is going to hit the slide.
start on the lowest objective
A microscope should not be focused by moving the objectives and the slide closer together because it will affect the working distance. It is the optimal distance between objective lens and the upper surface of the slide.
stage,stage clips and slide.....
at the moment, no, you don't. But the prizes for the objectives are constantly changing. You might get lucky.
body tube
body tube
If the objectives touch a slide, it will damage it, making it harder to observe the object you are viewing in the microscope.
The reason for changing a major is to ensure the correction mirrors your overall career goals and objectives.