The spindle of a lathe is a rotating hollow tube within, and protruding the head stock and to which a chuck, drive plate or facing plate attaches and rotates to enable machining.
It is housed within the head stock in bearings and has some gears around it which is driven by other gears which in turn is driven by an electrical motor.
A lathe that measures 6 inches from the center of the spindle to the closest part of the bed is considered a lathe with a 12 inch swing.
knurling
Lathe specifications· Distance between centers· Swing over the bed· Swing over the cross slide· Horse power of the motor· Number of speeds
A milling machine basically look like a drill press, but with the ability to move the work piece sideways. A lathe clamp and spin the work piece horizontally and use a stationary tool bit to cut and shape the work piece.
what is lathe machine in short answer
The backing plate on a lathe is used to mount the chuck to it and is the adapter to the lathe spindle.
Using geared head for gear box driven or stepped pulley if belt driven
A lathe that measures 6 inches from the center of the spindle to the closest part of the bed is considered a lathe with a 12 inch swing.
knurling
non- examples of feed in lathe machine?
Compound Slide, head stock tail stock tool post the spindle
Lathe specifications· Distance between centers· Swing over the bed· Swing over the cross slide· Horse power of the motor· Number of speeds
A milling machine basically look like a drill press, but with the ability to move the work piece sideways. A lathe clamp and spin the work piece horizontally and use a stationary tool bit to cut and shape the work piece.
There is no difference between a turning machine and a lathe. They are two names for the same kind of machine
what is lathe machine in short answer
difference between lathe and drill machine doing full on piece of metal
difference between lathe and drill machine doing full on piece of metal