It doesn't 'equate' to current (amperes) because they are two quite different quantities. However, you can find out how much line current is flowing (for a balanced load only) if you divide the number of volt amperes by (1.732 x VL), where VL is the line voltage.
It means 225 amps on each phase.
Single-phase, 2.5 amps; three-phase 1.443 amps.
This depends on what voltage the range is rated for and if it is single phase or three phase. At 220 volts single phase it is about 60 amps, 240 v single phase , 53 amps and at 480 v three phase about 15 amps.
75 Amps theoretically Need to know if the generator is 3 phase or single phase.
8,33 Amps
In a standard 3 phase system in North America, 7kVa would be equivalent to 19.5 amps on each phase. The equation is: 7kva*1000/208v/1.73=19.45 amps (3 phase)
It means 225 amps on each phase.
Single-phase, 2.5 amps; three-phase 1.443 amps.
If all three legs of the system are balanced then zero amps will flow all the way up to 100 amps if only one leg of the three phase system is used. The neutral in a wye three phase system carries only the unbalanced current. This is why in services for a three phase four wire system you are allowed to reduce the size of the neutral conductor.
50 Amps Single Phase 20 Amps Three Phase
You must rephrase your question to make it more specific. <<>> The formula to use to find KVA in a three phase system is, KVA = Amps x Volts x 1.73/1000.
You need to specify the phase. I assume it is 3 phase system. Then the HT current is 30.3 amps
A kw (kilowatt) is 1000 amps x volts. If you assume your one phase system has 120 volts, then divide by 120. Cheap, but close enough for most work, assume 100 volts, then each amp is a tenth of a kilowatt.
This depends on what voltage the range is rated for and if it is single phase or three phase. At 220 volts single phase it is about 60 amps, 240 v single phase , 53 amps and at 480 v three phase about 15 amps.
Amperes when kva is shown. The formula is, Amps = kva x 1000/1.73 x volts.
It depends upon the Generator system voltage. For 3 Phase, 600 Volt system, it will be 73 Amps For 3 Phase, 480 Volt system, it will be 90 Amps For 3 Phase, 208 Volt system, it will be 208 Amps
106 amps