A low voltage EKG means the amplitude of the QRS waves on the EKG are lower than would be expected. COPD, obesity, and pericardial effusions can cause low EKG voltages, amongst other causes.
Low voltage by definition means any voltage from 31 to 750 volts inclusive.
the power consumption of device is constant (provided no any condition is changed) at low voltage the power draw by motor is same at rated voltage bu according to formula the current is rise .
The classification of 230 volts is in the low voltage range.
Low voltage electricity typically refers to voltages below 1000 volts. It is commonly used in residential, commercial, and industrial applications to power lighting, appliances, and other electrical devices.
The term low potential or low voltage is defined by the electrical code book. The break over from low voltage to high voltage is 750 volts. The reason for this division is the procedures are completely different the way the wiring id done.
Low voltage on an EKG is usually encountered in people with very thick chest walls or with lung diseases. Low voltage results from increased impedance between the EKG leads (on the chest) and the source of the charge (the heart). Increased distance, poorly conducting tissue or air all increase the impedance, thus resulting in decreased voltage visible on the EKG.
more than likely misplacement of the electrodes, but low voltage could also indicate a small heart or perhaps a heart that isn't pumping very strongly.
That depends on what you mean. If you mean why does a circuit which has a high voltage side and a low voltage side have a greater average current on the low voltage side, it is probably because of power conservation: P = IV. If this is not what you mean, you will have to be more specific!
In the zener region of a diode, there is a relatively flat, low slope line for voltage as a function of current. As a result, increasing current in the zener region does not result in a significant increase in voltage - hence, voltage stability.
it means that its a low fuel
Please clarify what you mean by low voltage light fixture. What voltage?
Low voltage, high voltage, or a fault; the effects of these could be damage to equipment, including the transformer and tap cahnger.
As far as I know. Boost voltage or start voltage is a voltage increase that we use at low frequencies to compensate for the voltage lost. With no boost there would arise a flux which is to small. We would not be able to keep the demand of a constant magnetic flux, which result in losing the torque. The boost is responsible for maintaining the max torque at low frequency.
Trouble code P0562 means: System voltage low
P0562, charging system voltage low.
rl-low
Transformers are used to convert electricity from high voltage to low voltage and from low voltage to high voltage.