Low voltage by definition means any voltage from 31 to 750 volts inclusive.
Low voltage by definition means any voltage from 31 to 750 volts inclusive.
The voltage in North America can be as low as 110 and as high as 125 volts. The average is about 115 to 117 volts. <><><>><> House voltage in the US is generally 120v line to neutral and 240v line to line. It is referred to as a "120/240v single phase service." Actual voltage can be as low as 110/220 or as high as 125/250.
The classification of 230 volts is in the low voltage range.
Could be a lot if the amount of charge is low as in static electricity.
1.5 volts is not nearly enough voltage to harm anyone or any animal. You body has about 500 ohms of resistance which is entirely too much for 1.5 volts to push current through your body at a detectable level.
Low voltage by definition means any voltage from 31 to 750 volts inclusive.
The voltage in North America can be as low as 110 and as high as 125 volts. The average is about 115 to 117 volts. <><><>><> House voltage in the US is generally 120v line to neutral and 240v line to line. It is referred to as a "120/240v single phase service." Actual voltage can be as low as 110/220 or as high as 125/250.
Historically, transistor-transistor logic (TTL) voltage levels have been 5.0 volts, with a high being any voltage above about 3.5 volts and a low being any voltage below about 1.5 volts, with lots of variations on the high/low cutoffs from part to part. Since about 2001, however, most processors have been using low-voltage TTL (LVTTL), which has a nominal voltage of 3.3 volts (approx >2.2 volts for high and approx < 1.2 volts for low). Hence, many parts advertised as "TTL" today actually work at 3.3 volts rather than 5.0 volts.
Low Voltage
24 volts
The classification of 230 volts is in the low voltage range.
LT is Low Tension - it means Low voltage. generally up to 440 Volts system is known as low voltage system
Could be a lot if the amount of charge is low as in static electricity.
In electricity? High voltage ,high currents. Low voltage, low currents.
Answer for USA, Canada and countries running a 60 Hertz supply service.Line voltage is a term that is used to describe the voltage that is used to operate a specific device. A service that comes into a building would be considered line voltage. For a Class 1 circuit the top voltage for low voltage installations is 30 volts at 1000 vA. For a Class 2 circuit the top voltage for low voltage installations is not under 30 volts and not over 60 volts at 100 vA. Voltages used above 750 volts are considered high voltage installations.
Transformers are used to convert electricity from high voltage to low voltage and from low voltage to high voltage.
A quarter does not have a specific voltage because it is not a source of electrical energy. However, a quarter could potentially hold a charge if it is part of a static electricity experiment, in which case it would have a very low voltage.