What does Marked SECO 14k mean in a Diamond Ring?
SECO was the trademark of Stein and Ellbogen, a jewelry wholesaler.
what does pt mean on diamond ring
925, pertains to the purity of the silver, (925 is the highest it can be marked, nearly pure silver) JTW is a Hatian diamond dealer.
It refers to the weight of the diamond.
It is the authenticity of the diamond contained inside your silver ring.
Diamond Essence - simulated diamond
THE ring is marked FD 925 china
The wearer is protecting the diamond ring because it is worth more than the band.
platinum gold palladium and silver
4 karrot gold
its probably the manufacturer
Diamond solitaire indicates that a piece of jewelery, usually a ring, is set with a single diamond.
P14K stands for PLumb 14Karat gold. DQCZ stands for Diamonique Cubic Zirconia from QVC which is a very good diamond simulant. Hope this helps
solitaire means by definition, single. a solitaire diamond is a single diamond set in a ring or neclace.
14K nickel white
always virgin m
An x on a diamond ring means you will have good look in the future with your job or even winning the lottery.
I think it might mean the size.
A U with an arrow through it on a diamond ring does not have a significant meaning. It is most likely an engraving or marking of some kind.
it means that the diamond is 0.33 carat
It means "dryclean."
Translation: It is dry
it a silver ring or gold over silver ring with cubic zar /AKA fake diamond !!!!!!!!!!!
Founf a dimond ring that says 926 on it. What does it mean?
0.25 means its the carat of diamond,meaning you have quarter of carat real diamond
Do you mean Plate? or "Plat" If the ring is marked 14k plate, it's plated. If the ring is marked 14k plat- it's likely that the ring is bi-metal mixed with gold and platinum, commonly it will have white metal around any stones.. If there are no stones possibly a white accent on certain parts of the ring. Now, if the ring really says "Plai" - It could be the makers name, not sure!
It means 14K PBD Peter Brams designs
Could be 2.5 carat total weight diamonds.
PLAT means Platinum. I have seen a diamond ring with the diamond held by a silvery metal whilst main ring is gold. It is stamped "PLAT 18CT".
The number inside a diamond ring refers to the carat weight of the diamonds found in the ring. A .50 stamped inside a Diamond Solitaire ring means that it has a 1/2 Carat diamond while a .97 means that it is just below 100 points or One Full Carat.
DC stands for Diamond Cut.
i love washington dc
I believe it means diamond setting
That the stone is not a diamond, it is a Cubic Zirconium
The name of the company.
JTW is a diamond refinery in Haiti.
Have a ring RJ 8 marked inside. The 8 refers to ring size. Am searching RJ myself.
If it is a vintage ring, it may be from the Traub company that made engagements rings circa 1925 and marked their rings with a TT.
It means: dry well.
Filled or "Gold Filled" Sometimes it will say GF
I have a white gold ring stamped 750 HG with a diamond. The dimond is real. I filed the ring shank and it still tested 18kt. gold
The RJ probably indicates the manufacturer and the 925 indicates that the ring is made of 92.5% sterling silver.
other alloy than gold
Not enhanced in terms of pearls
tad is a maker's mark. It may be registered or unregistered.
its means 14 carat gold plate.
It means "dry stick".
ceco is not a Spanish word. But if you mean "seco", it means "dry"
i have i ring with two different colours gold on it but it just marked mb is it gold