0
What else can I help you with?
What is the purpose of network attached storage raid?
Network Attached Storage is short for NAS, which is computer storage connect to a network. RAID is a hard drive or storage container, which provide access to the file network.
What type of volume uses 50 percent of available drive space to provide fault tolerance for volume?
RAID-5 to create a 50MB Raid-5 partition across the three disks enter command diskpart create volume raid size=50 disk 1,2,3 Source Windows Server 2008 Network Infrastructure Configuration Lesson 2 page 30
How do you setup a RAID network?
I'm not really sure what you really mean. You can set up a RAID array, but not a network that only consists of RAID. However, you can set a cluster NAS server which can utilize RAID arrays. However, RAID is never a substitute for backups, as with RAID arrays each storage device you add creates an additional point of failure - and in cases like RAID level 0 (striping), you will lose everything if even one drive fails.
What is the difference between hardware raid and software raid?
Name says major difference between both. by the way Software RAID is created using feature provided by Operating System or any special software, but Hardware RAID is created using Hardware RAID controller Card. When you create RAID you are adding overheads to read and write operations. If you create software RAID and your server is too busy or you have many read and write operations you will see there is impact on performance. When you create HARDWARE RAID you will use dedicated controller with processor and some cache. This will not create overhead for your OS and you will find better performance. Software RAID will save some money for you but Hardware RAID will provide you value addition.
How many different raid levels are there?
There were originally five different RAID levels. However, you can use a number of hard drives to create more raid levels, although this may affect performance.
How does NAS Raid storage even work?
NAS Raid storage works by connecting computers to the NAS storage hard drive and allowing them to share information via the ethernet network connection.
How do you setup a network of laptops in such a way that you don't lose any information when one of them breaks or gets stolen?
What you're looking for - is a RAID network. RAID stands for either redundant array (of) inexpensive disks or redundant array of independent disks) There is a comprehensive article on Wikipedia on how the system works.
Is it possible to create a network with only one odd point?
you cannot create a network with only one odd vertice because then the network would end straight away and that the network would not be complete
Do you have to create a network key when setting up a wireless internet network?
It is not required, no.
Why is RAID 0 of any use if it offers no redundancy?
RAID 0 can be used to improve performance through concurrent access and/or create large logical disks out of multiple physical disks.
How do I connect 2 mac computers using airport. Both have airport cards installed. I am on cable.?
If you're using airport, you can create a network under the airport icon on the top right menu bar (if you don't have it there you can add it from system preferences) and click on "Create Network". There you can create a network, and the other computer can connect to that network (as long as the network is selected on the first computer). If you mean by like WiFi, you can go to System Preferences>Sharing>Internet and create a network there
How can you create a z drive in network?
Janell
