There were originally five different RAID levels. However, you can use a number of hard drives to create more raid levels, although this may affect performance.
The actual level used is not as important as what use the server is intended for. Different levels of RAID are used for different applications. They can include mirroring and striping.
7
Raid Levels are determined by MTTF/number. To determine the raid levels one should reference the standard raid levels and determine what raid level your data storage capacity needs.
RAID. There are different levels of RAID that have different features and can require even more than 2 drives to act as one drive.
RAID provides two main advantages: space and data security
The answer depends on whether one is looking to configure RAID via hardware or software. Windows is capable under disk management to run RAID via software. The first step is to convert to a dynamic disk. Then the RAID levels supported, in parentheses are Striped, 2 disks (0) Mirrored, 2 disks (1) Striped with parity, which required 3 disks (5) being the three most popular. That said if RAID is being done at the hardware level, then the operating system is oblivious to the fact that it is being raided at all and simply reads what the RAID controller tells it to. In this scenario all RAID levels are suported. For a deeper discussion on raid levels the following site is excellent. http://www.acnc.com/04_01_00.html
All RAID (Redundant Array of Independent Disks) levels share the common characteristics of data redundancy, improved performance, and fault tolerance. They combine multiple disk drives into a single unit to enhance data reliability and availability while providing varying degrees of speed and storage efficiency. Additionally, RAID levels utilize different methods of data striping, mirroring, and parity to achieve these goals, catering to different needs and applications. Ultimately, all RAID configurations aim to protect against data loss and ensure continuous access to data.
RAID Level 6 was introduced by the Berkley research team in a paper that followed its original outline of RAID levels. This system provides an extra degree of error detection and correction because it requires two different parity calculationsUnderstand Operating Systems-Sixth Edition, Chapter 7-Device ManagementRAID Level 6
RAID5 level in computer networking means to combine disk drive components. RAID, or Redundant Array of Individual Disks, have many different levels like RAID1, RAID2, and so on.
raid 0
They have many different levels of award, to recognize employees for their very different levels of accomplishment.
RAID levels share the following properties: * Several different physical disks are combined and accessed as a compound element. Under Linux, this is done by the driver for multiple devices, also known as /dev/md*. * The stored data is distributed over all disks in a well-defined way. * The data is stored in a redundant way over the disks, so in case of failure, data is recoverable.