Answer:
A BTU is the amount of heat energy required to raise 1 pound of water by 1 degree Fahrenheit. So a 30,000 BTU burner can heat 30,000 pounds of water by 1 degree Fahrenheit. Any multiple of the amount of water and the temperature rise that yields 30,000 is equivalent.
And 30 000 BTU equal 31 651,68 kilojoules.
Usually it is more meaningful to rate a heating device in BTU/hour.
This is a power unit conversion from British thermal units per hour (Btu/hr.) to its equivalent in horsepower (hp). There are 2544.43 btu/hr. in one horsepower. Conversely, there are 0.000393 hp in one Btu/hr.
There is no set size. The size depends on how many Btu of heat is needed for the burner in the appliance , heater or machine you are running .
30000 litres = 7925 US gallons = 6599 Imperial Gallons
Three types of laboratory burners are the Tirrill Burner, Bunsen Burner, and the Meker Burner. The Tirrill and Meker Burner have air and gas adjustments while the Bunsen Burner has only an air adjustment. Hope that helps.
11800 BTU/hr is 3.46kW
30,000 btu
Not all double gas wall ovens have the same number of BTUs. For instance, BlueStar makes a double gas wall oven that has a 25,000 BTU burner and one that has a 30,000 BTU burner.
Gas ovens use about 18,000 BTU/hr Electric Ovens typically have a 3 kilowatt (kW) burner, which equates to about 10,236 BTU/hr
30000 btus for every 400 square ft
30000 btus for every 400 square ft
That is a 2 1/2 ton unit. One ton of A/C = 12000 btu. The 30 in the model number refers to 30000 btu.
A US gallon of water is about 8.4 lb, so 30,000 galls is 252,000 lb. One BTU is the heat to raise one pound of water by one degF, so BTU's in your example are 252,000 x 15 = 3,780,000 BTU.
This is a power unit conversion from British thermal units per hour (Btu/hr.) to its equivalent in horsepower (hp). There are 2544.43 btu/hr. in one horsepower. Conversely, there are 0.000393 hp in one Btu/hr.
That is a 2 1/2 ton unit. One ton of a/c equals 12000 btu of cooling capacity. The 30 in the model number represents 30000 btu.
18000 BTU means TON 1.5 ,12000 BTU means 1 TON
A meeker burner is like a Bunsen burner in the fact that it uses propane as a fuel source, but there are many differences. A meeker burner burns hotter then a Bunsen burner and it also has a grid over the flame that causes the flame and heat to vibrate as the propane burns.
probably more than one second