A flowmeter is an instrument that is used to designed the rate of flow for a liquid or a substance such as a gas. The measure of the substance is by the volume of its weight. A flow meter can measure many substances that otherwise would not be measurable.
usually with a flowmeter. see http://en.wikipedia.org/wiki/Flowmeter ------------------ with the absence of a flowmeter, you can do this; Take the amount of fluid, then divide it by the time it took for it to flow from one place to the other. Example; 53 seconds for 100mL of water you go ; 100 divided by 53= 1.8 mL per 1sec the flow rate = 1.8mL/1s -Paws4-
How do they measure what?
120
Meters measure length, liters measure capacity, and kilograms measure weight.
False. Kilograms measure mass. Liters measure volume.
usually with a flowmeter. see http://en.wikipedia.org/wiki/Flowmeter ------------------ with the absence of a flowmeter, you can do this; Take the amount of fluid, then divide it by the time it took for it to flow from one place to the other. Example; 53 seconds for 100mL of water you go ; 100 divided by 53= 1.8 mL per 1sec the flow rate = 1.8mL/1s -Paws4-
The purpose is to determine the mass flow rate of fluid. The point is that it does not measure the volume of the unit, but the mass per unit time flowing through.
A Coriolis transmitter is a component of the Coriolis flowmeter. It transmits the information gathered by the flow tube sensors. This type of flow meter is used to measure the mass flow rate and density of a fluid.
You can find an ultrasonic flowmeter several places online. You could try omega.com if you're willing to pay money for it. However, you can also always check out ebay where you may be lucky into finding a great deal.
A flowmeter can measure the gas or fluid moving through it. In a domestic situation it can be useful when measuring gas heating systems to make sure payment bills are correct. They can also be used to see if there is a blockage in the system.
Clarence A. Haskell has written: 'Mass flowmeter summation system'
Positive Displacement meters like piston, gear etc
F. Markiewicz has written: 'The use of a positive displacement fluid motor as a flowmeter'
D. P. Brett has written: 'Ultrasonic flowmeter performance in pulsating flow'
Anant Suryakant Trivedi has written: 'A non-contacting ultrasonic cross correlation flowmeter for liquids'
Oxygen flowmeter is equipment used to control oxygen flow delivery in patients undergoing oxygen therapy. It is mainly used to regulate the flow of oxygen, oxygen humidification. Whether its performance is accurate and reliable will directly affect the patient’s personal safety. It can not only accurately measure the instantaneous flow of oxygen, but also enable healthcare workers to keep abreast of patient oxygen absorption status. Oxygen flowmeter has spread to all levels of medical institutions; township hospitals are also widely used. The correct way to use oxygen flow meter includes: Add distilled water to humidify bottle, the water level in the bottle is within the standard line. Prohibit the use of saline instead. Screw the nut of the flow meter onto the outlet fitting of the oxygen cylinder valve, the pressure gauge and flowmeter should be in a vertical position. Before supply oxygen, insert the gas tube into the inlet, and then the counterclockwise direction to turn the flow adjustment switch to open the source, so that the floats slowly rise. The scale line on the floating ball is the flow reading, the unit is L/min, and the medical gas supply can be adjusted according to the need. In the process of oxygen supply, if the water in the bottle of the oxygen flowmeter is lower than the water level line, the flow control switch should be closed in time and the humidifier bottle should be unscrewed. Add distilled water according to the first item. Then screw on the humidifier bottle to continue oxygen supply. If the flowmeter is not used, the flowmeter source should be turned off. If it needs to be removed, hold the flowmeter by hand and remove it. Then pour the bottle of water for cleaning and disinfection, stored in the non-corrosive and well-ventilated room.
The minimum conductivity required for a mag flow meter to work is 5 microS/cm. If the conductivity of butanol is more than this value, it will work.