answersLogoWhite

0

What does a risitor do?

User Avatar

Anonymous

15y ago
Updated: 8/18/2019

it is used for limiting current or dropping voltage.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What fuse do you change for car heater on 307 rapier?

I had the same problem on my 307 HDI it was not the fuse but it was the risistor in the heater matrix, to get to it remove the glove box, then remove the fan see in the haynes manual twist it clock wise and it comes out the risitor is in the space that is left, I had to buy a new one at £40


Your 97 aurora won't start you are getting a message clean key and wait 3 minutes How can you fix this the car starts after 3 minutes just fine?

Just about all GM cars have a Vats theft system in stalled on them. The little button on your ignition key (the black plastic tab/button with a silver pin is a resistor. when you put the key in ignition this resistor is checked for the correct resistonce (there are 15 different ones) Any way if there is dirt on key or inside the igniton switch the Vats system thinks your tru to steal your car. It resets after the three minents. The key seating in the switch for these 3 mins will probly make enought contact to read the risitor correctry. All you have to do is spray some contact cleaner on key and into the igntion key hole. some times just some WD 40 will clean it enought. Hope this helps, Ben Parker, San Jose,Ca. I've had a 97 Olds Achieva since August 2005. Ever since the beginning I've had problems with the security light/starting problem. Invariably when I needed to go somewhere or was in a hurry it would cut out and wouldn't start, or I had to wait 7-8 minutes for the security light to stop blinking. Just this last week the solution came! First off, if you turn on the key and if the lights on the dash lights don't go on, wait until they do. When they go on, if the security light is blinking, wait until it stops. Then wait until the bell stops ringing. Wait until the 'groaning' sound stops. Wait a few seconds more. Then without turning the key off, start the car without pressing on the accelerator. It's worked every time for me the last couple of weeks. C Aaron Salt Lake City, Utah